Bambu X1 Carbon Horizontal Side Filament Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A easy print to enable wide spools to attach to the side of the Bambu X1 printer
- Rating
- 4.875 / 5
- Likes
- 408
- Downloads
- 2,286
- Makes
- 32
- Views
- 13,182
- Reviews
- 24
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better]
[#2 updated it a little more to make it smoother to accept filament]
An easy print to enable you to attach a wide filament spool to the side of the machine. I've also added a hole for some 4mm OD PTFE tube to make it really easy to load it. It's been designed with a slight angle which means the spool should always slide toward the machine.
I used some M3x20mm screws to attach it, using the original filament spool holder fixings holes.
I've done my test print in PLA 30% infill, 0.2 height but with 5 walls / 5 top / 5 bottom, so it's near enough solid. Seems strong enough but time will tell.