Bambu X1 Carbon Horizontal Side Filament Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A easy print to enable wide spools to attach to the side of the Bambu X1 printer
- Ocena
- 4,875 / 5
- Polubienia
- 408
- Pobrania
- 2286
- Wydruki
- 32
- Wyświetlenia
- 13 178
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better]
[#2 updated it a little more to make it smoother to accept filament]
An easy print to enable you to attach a wide filament spool to the side of the machine. I've also added a hole for some 4mm OD PTFE tube to make it really easy to load it. It's been designed with a slight angle which means the spool should always slide toward the machine.
I used some M3x20mm screws to attach it, using the original filament spool holder fixings holes.
I've done my test print in PLA 30% infill, 0.2 height but with 5 walls / 5 top / 5 bottom, so it's near enough solid. Seems strong enough but time will tell.