Prusa Mini Horizontal ESP32 Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.86 – €2.28 net (excluding VAT)
For file: Prusa Mini_Horizontal Camera_NOANTENNA_0.4n_0.15mm_PLA_MINIIS_2h13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.07 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 2.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Horizontal Mount to allow flash to work at lower Z levels. There is a version with and without an antenna mount.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 1
- Views
- 277
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Files
- Top
- Base
- Base with antenna
Photos:
Grey Print = No Antenna
Black Print = Antenna
Printing
This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input Shaper, 0.15mm Structural, 15% Infill
Clearance Tolerance
Clearance is good with 65 FOV Camera. Smaller clearance with 160 FOV at minimum X axis; however, the print arm only gets that close when calibrating. PLEASE CHECK TOLERANCE BEFORE PRINTING
Camera View
65 FOV works; however, I recommend the 160 FOV lens to get a better view of the build plate.
160 FOV
160 FOV at Z Level 0
65 FOV
65 FOV at Z Level 0
I would recommend a 90-degree micro USB to the camera to avoid the cable snagging on the screen!