Prusa Mini Horizontal ESP32 Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal Mount to allow flash to work at lower Z levels. There is a version with and without an antenna mount.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 277
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Files
- Top
- Base
- Base with antenna
Photos:
Grey Print = No Antenna
Black Print = Antenna
Printing
This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input Shaper, 0.15mm Structural, 15% Infill
Clearance Tolerance
Clearance is good with 65 FOV Camera. Smaller clearance with 160 FOV at minimum X axis; however, the print arm only gets that close when calibrating. PLEASE CHECK TOLERANCE BEFORE PRINTING
Camera View
65 FOV works; however, I recommend the 160 FOV lens to get a better view of the build plate.
160 FOV
160 FOV at Z Level 0
65 FOV
65 FOV at Z Level 0
I would recommend a 90-degree micro USB to the camera to avoid the cable snagging on the screen!