Bambu X1 P1P Horizontal Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple no-support print to enable you to mount the spool holder at the side of the machine.
- Rating
- 4.909 / 5
- Likes
- 218
- Downloads
- 1,244
- Makes
- 12
- Views
- 12,492
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An updated side spool holder that I did for the X1. This one is 10mm shorter and the filament feed hole is 20mm lower, making it feed a little easier.
Designed to fit the P1P, with a 90-degree mount for the connecting coupling.
I printed this in PLA, 5 wall, 5 top and 5 bottom at 25% infill.
To mount I use some M3 x 20mm cpa head screws, to mount the 90-degree coupling part, I just used the original screws that were in the filament holder.
The holder will still fit the X1.. and I'm now moving over to this design on them all.