1 / 5
HORIZONTAL STAND FOR STARSHIP S24/B7
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical stand to proudly display your 3D printed Starship S24 and Booster B7 model.
- Rating
- 4.714 / 5
- Likes
- 201
- Downloads
- 422
- Makes
- 6
- Views
- 4,175
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
Original model
This support is to be used with my starship S24 and the booster B7.
Dimensions and Information
- It is about 6 cm high and 8 cm wide.
- There are 24 pieces to print.
- I printed it in about 5 hours.
Settings
- Infill: 10%
- Support : No
- Raft : No
Printing tips
- If some parts are loose or don't fit you can change the scale by +/- 1% in the slicer to get a better fit.
- For small parts I advise you to print at a very low speed and a high temperature (to reduce the pressure in the nozzle and not to have warping), personally, I printed them at 220° and 5mm/s
- The parts are positioned in the optimal direction for printing.
- For the base, it is recommended to print with 4 perimeters to avoid visible infill.
Post Printing
- You may need to sand the areas where the pieces meet.
- I also advise you to put glue to have a better solidity.
Parts list
