1 / 5
Zojirushi Thermos/Thermal Mug to Melitta Pour-Over Cone adapter — zdjęcie 1
1 / 5

Zojirushi Thermos/Thermal Mug to Melitta Pour-Over Cone adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple adapter so you can pout-over directly into your thermos.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
75
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Had my badly-balanced pour-over cone tumble off the top of the Zojirushi thermos the other day; not interested in that kind of life, time for some more bespoke nonsense.

I think most of the Zojirushi thermos mugs have a standardized screw collar width (around 50mm), but I have at least tested this with a KHE-48 and an SF-48.

Melitta Pour-Over Cone has an inner lip around 68mm in diameter, so if you have a power-over cone with a wider one, grab the f3d file and adjust the parameters (should be fully parameterized). Same thing goes if you have a different sized thermos collar you need to adapt for

Tagi