P
PrintablesBM
espresso tamper - Senseo - Melitta
Printed in PLA. This plunger works well with the compatible silo: https://www.printables.com/model/919556-senseo-silo-for-coffee-grind
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 0
Wyniki wyszukiwania: melitta
Liczymy pasujące modele…
P
PrintablesSimple3D
1950's Melitta 102 Coffee Pour-over Filter
My mom recently gave me my Grandfather's 1950's Melitta 102 porcelain 3 hole coffee filter. I thought it would be a good test for my Revopoint POP 3D scanner. I was able to make an autosurface solid model from the point cloud, but I…
- Pobrania
- 423
- Polubienia
- 54
- Ocena
- 5
P
PrintablesNikasio14
Yet another Bean Hopper - Coffeo Solo Melitta and Purista
After two versions of bean hoppers, falling off my machine I tried and digg into F360 to give it a shot and try my own version of the Melitta Coffeo Solo Bean Hopper. According to other members this design does fit the Melitta Purista as…
- Pobrania
- 322
- Polubienia
- 22
- Ocena
- 4,8
P
PrintablesMiLkiE
Melitta Caffeo Barista Bean Hopper Extension
This is a Bean Hopper Extension for the Melitta Barista Coffee Machine Series (T/TS/Smart). I was tired of having to refill the bean hopper every day, so this extension more than doubles the capacity and is a total of 80mm high including…
- Pobrania
- 183
- Polubienia
- 10
- Ocena
- 5
P
Printableshangloose
Melitta Caffeo Solo & Milk, coffee beans extension
Melitta Caffeo Solo & Milk, coffee beans extension
- Pobrania
- 142
- Polubienia
- 5
- Ocena
- 5
P
PrintablesChinaquads
Melitta Purista Series 300 Bean Hopper // Bohnenbehälter
Dir hat deine Purista zu wenig Platz für die Kaffee Bohnen? Hier die perfekte Erhöhung um ca. 200 Gramm mehr Kaffee in den Automaten zu füllen. Am besten aus PETG drucken. Support nur von der Druckplatte. Happy printing. Does your Purista…
- Pobrania
- 133
- Polubienia
- 6
- Ocena
- 0
P
Printablesmarimoart
Melitta Solo trash tray
Model of a trash tray for used coffee from Melitta Solo coffee machine. But can be used in “Solo & Milk” and “Solo & Perfect Milk” My print was made with PLA. Hotend temp 220 C and bed 60 C. Layer heigth 0.2mm and supports.
- Pobrania
- 130
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDrSzabo
Gridfinity Melitta #4 coffee filter holder
The original filter holder I created was wonderful and performed its function of holding filters flawlessly. However, the previous model slid all around the drawer, and even though I said to myself I wasn't going to Gridfinity-ify ALL the…
- Pobrania
- 121
- Polubienia
- 48
- Ocena
- 5
P
PrintablesAlia5
Melitta Caffeo Solo Bean Hopper Extender
Made this for the coffee machine at work... Rotate 90°... Print Settings Rafts: No Supports: Yes Resolution: 0.325 Infill: 5 Category: Kitchen & Dining
- Pobrania
- 117
- Polubienia
- 10
- Ocena
- 4
P
PrintablesStadi
Melitta AromaFresh Bohnenbehälter Erweiterung / Bean hopper extension
Erweiterung des viel zu kleinen Bohnenbehälters einer Melitta Aromafresh Kaffeemaschine. Ich habe zwei Files hochgeladen, eins mit "normaler" Wandstärke und eins mit sehr dünner Wand. Das Teil mit der dünneren Wandstärke ist für…
- Pobrania
- 102
- Polubienia
- 2
- Ocena
- 0
P
Printablestjg04
Melitta Barista Coffee Hopper
I printed with supports at 15% infill and seems plenty rigid. Print on with the top face on the build plate.
- Pobrania
- 97
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMarin
Melitta 1x4 Coffee Filter Holder
Old hanging coffee filter holder need to be replaced. I need one that can hang or can stand on the table. I decided to design my own. I have accepted the print time which is more than 8 hours, to get a sturdy model, otherwise I need to…
- Pobrania
- 94
- Polubienia
- 11
- Ocena
- 5
P
PrintablesOpulius
Grinder Nozzle Melitta Molino Mod
Grinder Nozzle Melitta Molino Mod A little upgrade for the Melitta Molino Coffee Grinder. I had the problem that the coffee powder for my espresso spilled out of the "nozzle" so I build a better one. Just simply print it and push it…
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 5
P
PrintablesJannik
Melitta Barista TS Coffeebean Storage/Hopper
Here you can get a hopper/storage module for the Melitta Caffeo Barista TS. Crema and Espresso beans are stored seperate. The original lit fits on the storage module.
- Pobrania
- 93
- Polubienia
- 9
- Ocena
- 4
P
PrintablesPeter Main
Melitta Coffee Filter Holder
Holds one full box of coffee filters (40). Keep the scoop handy on the side holder. I printed mine in Prusament Galaxy Black PETG
- Pobrania
- 89
- Polubienia
- 9
- Ocena
- 0
P
PrintablesXBurgy
Melitta Solo Large Coffe Tray
Enlarged coffee tray for Melitta Solo coffee maker. The cartridge capacity is about 0.8 kg of coffee. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 mm Infill: 20 Filament: Prusament PLA, PETG…
- Pobrania
- 76
- Polubienia
- 6
- Ocena
- 5
P
PrintablesBootjevaarder
Coffee Filter Holder for Melitta #2
Printing I printed with PLA+, layer height 0.2 mm. Assembly Remove the anti warping brims with a sharp hobby knive. Use double sided tape to attach the holder to the wall or inside a cupboard.
- Pobrania
- 65
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJames G
Coffee Filter Holder for Melitta #2 and Hario V60 (100 count)
Parameters of note in the f3d file include: Holder depth - 2 inch by default (for 100 filters). Wall angle - 40 degrees for Melitta, 45 for V60. Holder top width - Width of the holder at the top, 6 inches by default. Adjusting these…
- Pobrania
- 61
- Polubienia
- 15
- Ocena
- 5
P
Printablesfloano
Melitta Caffeo Passione OT coffee bean hopper extension
Makes room for more beans.
- Pobrania
- 60
- Polubienia
- 7
- Ocena
- 5
P
PrintablesAurel #
Silo MELITTA
Silo for MELITTA Purista coffee maker. Height of 70 mm. Silo pour cafetiere MELITTA Purista. Hauteur de 70 mm.
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDrSzabo
#4 Coffee Filter Holder - Melitta
While the original cardboard boxes for Melitta coffee filters are unobtrusive, serve the purpose of holding filters, and have lived comfortably in our kitchen drawer for years and years now, I wanted to practice something different with…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
Printablesmcmiller
Melitta 102 for Mugs
I widened the platform/disc that sits on the coffee cup to where it will sit securely on top of larger mugs.
- Pobrania
- 43
- Polubienia
- 12
- Ocena
- 0
P
Printableseski
Melitta Solo Large Coffee Tray - Remix window
A remixed version of this model - https://www.printables.com/model/106893-melitta-solo-large-coffe-tray I needed it a little shorter and with a little window to see the status of the beans. I have a little place for it under some cabinets…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 5
P
PrintablesJAV3D
Melitta CI Touch Milchauslauf Ersatz / Milk Outlet replace
Beschreibung des 3D-gedruckten Milchauslauf-Ersatzteils: Deutsch: 1. Verwendungszweck: Dieses 3D-gedruckte Modell dient als Ersatz für den Milchauslauf eines Melitta CI Touch Kaffeevollautomaten. 2. Druckdetails: Es wurde entwickelt, um…
- Pobrania
- 40
- Polubienia
- 6
- Ocena
- 0
P
Printablesphilipps
Mug Holder for Melitta Caffeo Varianza Coffee Machine
This is a remix of https://www.thingiverse.com/thing:3240686. I always have the problem in the morning of either holding my mug under the machine in an angle or filling the coffee from one or two cups into the mug. The linked mug holder…
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 5
P
PrintablesBrian Coulter
Bean Hopper for Melitta Bean to Cup Machines
Melitta bean to cup coffee makers are slim - this is a selling point - but it means that the full charge of beans only lasts a few days in a coffee loving house. I designed an extension or hopper for the bean fill compartment so that I…
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
Printablesgig4ntic
Melitta Caffeo Solo Bean Hopper
Boost your Melitta Caffeo Solo's coffee bean capacity by 3x with this easy-to-print hopper extension! Designed for a perfect fit, this model dramatically reduces refills. Print with 0.16mm layer height and underside supports for optimal…
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 4,5
P
PrintablesBrian Coulter
Coffee Grounds Container for Melitta Bean to Cup
Coffee makers are supplied with a coffee grounds container. Mine was missing so I printed one while I was waiting for one to be supplied by customer care team. Now I find it great to have two; I can accumulate grounds for quite a few days…
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
Printablespsott
Melitta Caffeo CI XL Been Hopper
Melitta Caffeo CI with both chambers combined into one
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMr_D
Coffee bean raiser for Melitta caffeo solo
Raiser for more beans to fit in the Melitta caffeo solo. Used 2 drops of CA glue to keep the raiser in place.
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
Printablesdaarshclicks
Melitta Coffee filter #2 holder MK2
This is a minimalist holder for Melitta #2 coffee filters. Unlike my other model [ https://www.printables.com/model/293972-coffee-filter-holder-for-melita-2 ] this one needs magnets to stick it up on relevant surface as it does not have a…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 5
P
PrintablesPied Piper
Magnetic Coffee Filter Holder for Melitta #4 Filters
There are many filter holders similar to this on Printables, but I couldn't find one designed to be mounted to a fridge with magnets. This holder works with Melitta #4 filters and can be printed with basic PLA. A brim may be required. The…
- Pobrania
- 27
- Polubienia
- 5
- Ocena
- 0
P
Printableszacharow.makes
Melitta #100 Coffee Filter Holder
This is a Melitta 100 coffee filter holder designed specifically for the AromaBoy coffee maker. You can store a full stack of filters inside — Melitta sells them in packs of 40 , and they fit perfectly. The AromaBoy is Melitta’s smallest…
- Pobrania
- 26
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLoogle
Melitta Pour Over Adapter and Cup Spacer for Breville Precision Brewer
The Breville Precision Brewer can make a lot of coffee, but sometimes you just want something easy to prep in the morning for one person. I already had a Melitta Signature Series 1 Cup Pour-Over Cone so the adapter is made for that. It…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesB Jay
longer Grinder Nozzle Melitta Molino Mod for Portafilter machine
I (quickly) created a bigger model, so you can put your portafilter or any small cup directly under it. (I mean i like the “design”, but my resize work was rly cheap ^^') To make it work, you need to tape the button on the top (and push…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesVcom
Melitta Milk Container Booster
Melitta Milk Container Booster The coffee machine froths the milk less well when the container is almost empty. By placing the container 9 centimeters higher, this problem is solved. Printed in ABS. Smooth it to match the shiny machine…
- Pobrania
- 22
- Polubienia
- 6
- Ocena
- 5
P
PrintablesMatt Nelson
Moccamaster Cup-One Melitta Filter Folder
The Moccamster Cup-One coffee maker uses its own special-size “No.1” filters that aren't commonly found. The super-common Melitta No.2 filters work fine in the machine, but are a little too large, and need to be folded over a bit to make…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRoad
Bean Hopper Melitta Fully Automatic Espresso Machine E950–213
A bean hopper for the Melitta Fully Automatic Espresso Machine E950–213. It allows you to add way more beans to the machine. The original lid is re-used. I suggest to only print and use this if you have lots of traffic on your machine, as…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesReypatey
Melitta Original 1 Round Filter 94mm 100 pieces holder
It had to be done.
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDyer_Maker
Thermal carafe adapter for Melitta 6-cup pourover coffee cone
This nice little adapter ring should fit into the opening of various thermal carafes. It makes it easier to use larger pour-over style coffee cones. In particular, this older 6-cup Melitta cone. The adapter never touches your coffee, so…
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAdamDnd
Funnel for Melitta CI touch
We have a shelf above our coffee machine that makes it difficult to pour beans into the hopper. This makes it easier. I printed it in PLA in the orientation shown, with 40 loops of skirt, 1 layer thick, at a distance of 0mm for stability.
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesChristian
Moccamaster Cup-One Melitta Filter Folder easy hinge
The Melitta No 4 or Melitta 102 filters need to be aligned at the red line in the picture. The No2 filters can be aligned at the provided lip on the top. Just print it as you like, i added enough tolerances to print on most settings (i…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
Printablesclomads
Pour Over Drip Tray/Mount (for Melitta)
I needed a place for my pour over in my bus conversion that allowed for drainage, so I made this one that sticks to the corner of the sink with VHB. Printed with PETG to reduce warpage from hot coffee. My printer doesn't like to do tight…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHenning
Federstift Stift Abdeckung Melitta Aromafresh
Ersatz für gebrochenen Federstift an Filterhalter, den Stift unten und die Abdeckplatte Gedruckt in 0,1 bei 100% Füllung. aber es wird sicher auch grober funktionieren
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNolli
Melitta Filter No_1 Halter
Ein weitere Halter für die Melitta Filter No.1, nur platzsparender. Aus PLA oder auch PETG. Auch hier Standardeinstellungen 0,2mm Layerhöhe, allerdings mit 3 Wandlinien.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarcel Holub
Melitta Solo Cover for grinder(Lid)
It also fits on Melitta Cafeo Lattea and Other... Made It because mine went missing.
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablesthrasher
melitta mill and brew grinder lock paddle
This is a replacement grinder lock for the Melita Mill and Brew coffee maker. I've had this coffee maker since 2003 (over 14 years), and really like the flavor of coffee it makes. Everyone that tries it says "wow, that's good coffee".…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablesmario3d
melitta water tap for empty water reservoir new version
this model i have created to empty the water reservoir of the melitta purista 300 you can click it on to it for empty the water into the sink when i was empty the reservoir always the water goes not into the sink bet next to it so i have…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesavaghon
Coffee Filter holder for Melitta 101 with cutout mould
Holder for Melitta 101 (small size) coffee filters. Includes a cutting mould if you want to cut them yourself from larger filters. Prints without supports.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNolli
Melitta Filter No_1 Ablage
Ein kleine Ablage um die Filter mal anders als im Karton aufzubewahren. Gedruckt habe ich es auf dem Prusa MK4s. Standardeinstellungen 0,2mm Layerhöhe, allerdings mit 3 Wandlinien
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJ.P.
MELITTA Coffee Silo
Coffee tray for Melitta Solo coffee maker. For the viewing window (version 2) I used a piece of a CD cover. Printer Settings: Printer: Prusa MK4S Rafts: No Supports: No Resolution: 0.20 mm Infill: 15 Filament: Amazon Basic PETG Black
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 5
P
Printableszacharow.makes
Melitta Aromafresh Coffee Maker Lid
Melitta Aromafresh Coffee maker replacement lid. Printing Notes Printed on Prusa Mini - you have to turn it 45 degrees to fit on A1 Mini/Prusa Mini Material: PLA Silk Designed entirely in TinkerCad , using analog measurements .
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBartPe
Melitta Barista lid for milk container
Outer shell for the melitta barista milk container
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesT Liiv
Melitta Molino Container Lid
I lost my lid during moving, so I made a new one.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHenrik Støa Ingebo
Melitta Caffeo Solo Large Coffee Bean Container
Melitta Caffeo Solo Large Coffee Bean Container
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
Printablesbillsmithem
Melitta Signature Series 1-Cup Porcelain Pour-Over Coffeemaker Stand
I replaced my plastic pour-over with a Melitta porcelain pour-over. I'd been using a small bowl to catch the last few drops but the new pour-over was very unstable on it, so I designed and printed one that uses a small jam jar to catch…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printableschrisspraiss
Melitta #1 Filter Holder
This holder can hold Melitta #1 Coffee filters. It can be mounted to a surface (e.g. using adhesive strips) to organize your coffee filters. You can insert about It is printed in two parts and then glued together to avoid unnecessary…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printablesgexgecko
Zojirushi Thermos/Thermal Mug to Melitta Pour-Over Cone adapter
Had my badly-balanced pour-over cone tumble off the top of the Zojirushi thermos the other day; not interested in that kind of life, time for some more bespoke nonsense. I think most of the Zojirushi thermos mugs have a standardized screw…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTritschi
Adapter Emsa Thermos Flask to Melitta (Ceramic) Coffe Filter
As both systems did not really match I made it match. TinkerCad. MK4S with ABS filament. Have fun with this solution, happy printing! Explore my other Printables: https://www.printables.com/de/@Tritschi
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
Printablesbgav
Melitta Solo sliding base
The base is a simple overengineered platform allowing me slide in an out the machine from the kitchen cabinet, where rubber feet are too grippy for comfortable machine maintenance.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArsOnist666
Kaffeebohnenschacht für Melitta Caffeo CI
Mir war der Schacht für die Bohnen schon immer zu klein, deshalb hab ich diesen Schacht entworfen. Er fasst nun über 1 kg Kaffeebohnen. Er passt sehr genau auf den vorhandenen Schacht und kann mit dem Original Deckel verwendet werden. Wer…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables
Magnetic Coffee Filter Holder for Melitta #4 Filters
There are many filter holders similar to this on Printables, but I couldn't find one designed to be mounted to a fridge with magnets. This holder works with Melitta #4 filters and can be printed with basic PLA. A brim may be required. The…
P
Printables
Coffee Filter Holder for Melitta #2 and Hario V60 (100 count)
Parameters of note in the f3d file include: Holder depth - 2 inch by default (for 100 filters). Wall angle - 40 degrees for Melitta, 45 for V60. Holder top width - Width of the holder at the top, 6 inches by default. Adjusting these…
P
Printables
Melitta Aromafresh Coffee Maker Lid
Melitta Aromafresh Coffee maker replacement lid. Printing Notes Printed on Prusa Mini - you have to turn it 45 degrees to fit on A1 Mini/Prusa Mini Material: PLA Silk Designed entirely in TinkerCad , using analog measurements .
P
Printables
Melitta Solo sliding base
The base is a simple overengineered platform allowing me slide in an out the machine from the kitchen cabinet, where rubber feet are too grippy for comfortable machine maintenance.
P
Printables
Melitta filter holder
We needed a nicer way to store oure filters. Here it is for the World to enjoy. Note that it has a tendency to warp. I overcome this with a brim. Please share picturs of you makings.