1 / 4
Thermal carafe adapter for Melitta 6-cup pourover coffee cone
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pourover coffee cone won't fit into your thermal carafe's opening? Then you need this!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This nice little adapter ring should fit into the opening of various thermal carafes. It makes it easier to use larger pour-over style coffee cones. In particular, this older 6-cup Melitta cone. The adapter never touches your coffee, so food safety is a bit less of an issue.
Print settings:
- PETG or ASA/ABS strongly recommended. PLA will MELT and DEFORM.
- Print in the orientation of the STL
- Paint-on some organic or tree supports where the cone meets the ring.
- 0.2 layer height
- 2 perimeters
- 10% liightning infill
NOTE the second picture shows how poorly the cone fits into this carafe WITHOUT an adapter.