Mini Rugged Cases for Film and Camera Batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small rugged cases with latching lids for camera accessories
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Variants are currently available for 3x 35mm film and 2x Fujifilm NP-W126S rechargeable batteries; I may design more for other items if requested (please provide dimensions).
Printing and Assembly
Print in the most impact-resistant material you have access to (ABS preferred). Increase perimeter count until the walls are solid. The cases can be made relatively watertight (not guaranteed) by laying down a ~1mm thick bead of silicone sealant inside the groove on the bottom half and allowing it to cure before closing the case. I recommend adding a strip of 2mm thick EPDM foam tape inside the top cover to cushion the items inside. Assemble as shown in the photos.
Required Hardware
3x 35mm film case:
- 3x M2x20mm socket head cap screw
- 3x M2 x 3mm diameter x 3mm depth threaded insert
2x fujifilm np-w126s case:
- 2x M2x20mm socket head cap screw
- 1x M2x16mm socket head cap screw
- 3x M2 x 3mm diameter x 3mm depth threaded insert