1 / 6
Mini Rugged Cases for Film and Camera Batteries — image 1
1 / 6

Mini Rugged Cases for Film and Camera Batteries

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small rugged cases with latching lids for camera accessories

Rating
0 / 5
Likes
11
Downloads
33
Makes
0
Views
258
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Variants are currently available for 3x 35mm film and 2x Fujifilm NP-W126S rechargeable batteries; I may design more for other items if requested (please provide dimensions). 

Printing and Assembly

Print in the most impact-resistant material you have access to (ABS preferred). Increase perimeter count until the walls are solid. The cases can be made relatively watertight (not guaranteed) by laying down a  ~1mm thick bead of silicone sealant inside the groove on the bottom half and allowing it to cure before closing the case. I recommend adding a strip of 2mm thick EPDM foam tape inside the top cover to cushion the items inside. Assemble as shown in the photos.

Required Hardware

3x 35mm film case:

  • 3x M2x20mm socket head cap screw
  • 3x M2 x 3mm diameter x 3mm depth threaded insert

2x fujifilm np-w126s case:

  • 2x M2x20mm socket head cap screw
  • 1x M2x16mm socket head cap screw
  • 3x M2 x 3mm diameter x 3mm depth threaded insert

Tags