1 / 1
Doppelstabmattenzaun Anschlusswinkel Toranschluss Stabmattenzaun — zdjęcie 1

Doppelstabmattenzaun Anschlusswinkel Toranschluss Stabmattenzaun

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anschlusswinkel für Doppelstabmattenzäune. In zwei Richtungen einstellbar. Vewendet M8 x 20mm Schrauben und Muttern.

Ocena
0 / 5
Polubienia
7
Pobrania
82
Wydruki
0
Wyświetlenia
475
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Wurde in PETG gedruckt mit 3 walls und 20% infill ohne Supports auf einem Creality K1. Würde mehr Walls oder ein Steiferes Material wie ABS / ASA Empfehlen. Jedoch funktioniert es auch in PETG ausreichend gut.

Der Winkel kann mit selbstschneidenden Schrauben in die Stahlpfosten oder auch mit Holzschrauben and Holzkostruktionen befestigt werden. Am besten Schrauben mit Flachkopf verwenden, um die Schicht nicht zu spalten. Konische Schraubenköpfe funktionieren auch, man muss jedoch mit bedacht anziehen.

--------------------------------------------------------------------------------------------------------------------------------

Printed in PETG with 3 walls and 20% infill, without supports, on a Creality K1. I would recommend using more walls or a stiffer material such as ABS / ASA. However, PETG also works sufficiently well.

The bracket can be mounted with self-tapping screws into steel posts, or with wood screws into wooden constructions. Flat-head screws are best to avoid splitting the layers. Countersunk screw heads also work, but they need to be tightened carefully.

Tagi