SMC-9 Picatinny stock Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A picatinny version / modification for the G&G SMC-9 stock backplate, allowing for Picatinny based stock to be added.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This works with the original hardware such as:
Brass bushing
Threaded rod
Folded stock spring, plunger
pin
No post-processing required apart from a little force when inserting the brass bushing and the threaded rod.
Recomended settings:
Layer height: 0.2mm ( with 0.4 mm nozzle)
Walls: 4
Infill: 15% Gyroid
Top z distance: 0.15-0.2
Support: Tree , 30% threshold
Printer must be calibrated for overhangs and supports
When importing into the slicer orient the part on its x axis by 45 degrees so the “arms” are pointed upwards.
This will remove the fail point at the layer lines.
If you have any questions please leave a comment and i will get back to you.