SMC-9 Picatinny stock Backplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A picatinny version / modification for the G&G SMC-9 stock backplate, allowing for Picatinny based stock to be added.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This works with the original hardware such as:
Brass bushing
Threaded rod
Folded stock spring, plunger
pin
No post-processing required apart from a little force when inserting the brass bushing and the threaded rod.
Recomended settings:
Layer height: 0.2mm ( with 0.4 mm nozzle)
Walls: 4
Infill: 15% Gyroid
Top z distance: 0.15-0.2
Support: Tree , 30% threshold
Printer must be calibrated for overhangs and supports
When importing into the slicer orient the part on its x axis by 45 degrees so the “arms” are pointed upwards.
This will remove the fail point at the layer lines.
If you have any questions please leave a comment and i will get back to you.