Counting matching models…
Update: PFC, LCpl, and Sgt ranks have been fixed! I created these separate from the other ones because in a Gun Club, ya gotta have guns! Have fun with these for Hail and Fairwell gifts, Moto decor in your workplace, home or bedroom,…
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
The Coat of Arms of the USMC, in a simplified STL. The original site states the following for all models: Все модели взяты в открытом доступе либо куплены.
Shelf for use with Leviton SMC cabinets. Slots on top and sides should allow you to use either tie-wraps or velcro straps to secure the items/devices to the shelf. Print standing on its side using tree supports. Created from scratch using…
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
Experimenting with an Eagle, globe, and anchor with a skull on the back of the globe.
This a remix of rainb0w_wheez3's 8/16 port Keystone patch panel made to mount into a Leviton Structure Media Center cabinet. It flexes a bit in the mounts when using normal plastic push pin mounting connectors, but seems to hold up well…
I created (2) different types of the First Sergeant rank, the flat diamond or the 3D diamond version at the center. When printing the 3D version labelled as “1stSgt V2”, the below perimeters worked best using the Cura Slicer: Print Speed:…
I created (2) different types of the Sergeant Major rank in order to choose from a plain and flat star to a 3D version star at the center. When printing the 3D star, labelled "SgtMaj V2", the below perimeters worked best for me on all of…
To all my Devil Dogs! Need to put you phone somewhere so you don't lose it? When Field-day Inspection comes and wanna show off how Moto you are? How about looking Moto-stylish at work? Then print one of these in various colors, add…
In Cura, the settings below worked better for me with this chevron and printed nicely: Quality: Detailed/High quality settings (to get better detail for the bursting bomb) Nozzle Tip: 0.2 - 0.4 (Can use a wider nozzle if printing size is…
Leviton SMC 6 & 8 Port Keystone bracket, smaller to fit better on a Lulzbot Mini 2 build plate and take less time.
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
I needed a renal friendly way to display my NCO sword instead of it gathering dust somewhere. Use 3M velcro to attach to wall and tape/foam to pressure fit the scabbard. f3d file included so adjust to your liking or make it work for other…
Ammo Box Key Chain No supports print time in less than 2 hours Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .12 Infill: 40 Filament: Amolen https://amzn.to/3nJW1MO PLA Olive Drab Notes:…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. The model is for the USMC ACV unit . While…
A small shelf for Leviton SMC's. The shelf can be positioned more left or right by attaching the shelf in different sets of grooves. Support me on ko-fi.
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC ACV-30 unit. Note…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC MTVR unit . Three…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. The model is for the USMC JLTV unit , and…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. The model is for the USMC LAV-25 unit . While…
They are made with such small tolerances that they should just stay on, but incase they are a little bit loose, you could use a tiny bit of sticky tape to fix them into place. Mine hold without any tho. They are for 8mm hex bolts so they…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This is a model for the USMC Rifleman unit.…
For the “Whoa-Club” that navigates in the gray of the USMC! Can be used for the US Navy and US Coast Guard Warrant Officer ranks by using a different color for the blocks. If using an FDM Printer, in particular using PLA, I recommend…
For testing step motor performance resp. your DIY projects a ZK-SMC-02 is a real helpful tool. This is a case for it. Without a case it is not convenient to work with the controller. Printed on my MK4 with Prusament PLA Gravity Grey. The…
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Officer/NCO unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Corpsman unit . The…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC 60mm mortar team unit…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC UTV unit . While…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC HMMWV unit . Three…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M2 (.50 cal) gun team…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC grenadier unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M249 Gunner unit.…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC sniper unit . While…
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC MAAWS gunner unit.…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC Javelin team unit .…
Used container file. made the inner card holder. added text and EGA
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC M240 gun team unit.…
Since I drag this mixer around in the studio for controlling my stream audio, I needed a permanently attached stand. To give it a tight fit and prevent rattling, I attached some rubber pieces behind the mixer and some rubber feet. The bar…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC aviation ground crew…
APC SMC1500I Bezel 2x M3x20mm bolts required to piece the front together. I tapped the PLA to thread into and it's plenty strong enough. I've yet to get around to filler/paint but the body of this is good enough to share for others to…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. Note that this model is for the USMC Black…
Ich habe für die KTM SMCR 690 BJ. 2019 Stopfen für die Fußrastenhalterung entworfen. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%
USMC Coaster Set Marines Devildog Devil Dog United States Marine Corps 100mm With Holder
I created this clock face for my father who is a retired Marine. I created it in Fusion 360 then exported the 3mf. I've included a step file and the 3mf. The 3mf was scaled 2mm larger in the slicer to account for a little extra space that…
I will make some better photos when i have some time :) For questions u can ask
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC EW operator unit .…
Ich habe für die entworfen. Stopfen Oben und Unten unterscheiden sich in der Tiefe. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%
This mount allows you to position a Berotec CUMPAN below the instruments of a KTM 690 SMC R (2019), possibly also other models. It raises the CUMPAN to the same level as the display and provides solid contact with both the triple clamp…
SMC bracket for mounting a Frontier GPON ONT model FOG421 into common Structured Media Cabinets. This includes printed mounting tabs for hanging the device, so no screws are necessary to be added after printing. Use the appropriate…
This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting…
6 mm hols Category: Replacement Parts New Modell is now out !!! https://makerworld.com/en/models/23629#profileId-359006
CNC motherbord BSMCE04-PP box Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Plastika Trček PETG any Category: 3D Printing
Designed for 3mm counter-sunk screws .
This is a fine Focuser based on a design from wal20. It uses two #6-32 screws to tension and lock on a piece of steel plate. Beneath the ring are a piece of felt to ensure a good lock down. Print instructions Printed on a Prusa Mk2,…
Printed with MK3+, PLA OKey but preferebly PTEG. Print it standing with supports. Update 20231226 with new DIN holder and opening for easier mount/dismount.
The WiiM Amp is pretty heavy and I wanted to develop a mount for the Leviton Structured Media Center (SMC) That would be able to handle the weight. I added a lot of mounting holes so you can place it in either side or in the middle of the…
Printed in PETG with 0.2 Layer height, 2 Perimeters and 0.4 Nozzle. Infill was 15% I added the Logos in Prusa Slicer. they are not included in the STL. I will add a photo where it is on the Monitor, i just do not have it here at the moment.
Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…
Need to mount network gear in a Leviton Structured Media Cabinet (SMC)? Tired of having to find the exact printable that fits your network equipment? This set of printables can be used to build out a scaffold where you then use then Hook…
I liked the model originally done by JHagen, but wanted to make it a sculpture for my father for Veterans Day, I added a base with an angled front and added text, "USMC and his rank of Master Seargent when he retired. Printer: Anycubic…
The front cap is a friction fit, while the back cap locks in place via the camera's mounting points. I added texture to the outside edges to make it easier to put on and take off.
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
This works with the original hardware such as: Brass bushing Threaded rod Folded stock spring, plunger pin No post-processing required apart from a little force when inserting the brass bushing and the threaded rod. Recomended settings:…
OSMC Kodi Remote Control Stand Remote:…
The original blinkers for the SMC Ram are trash. By Swiss law there must be a certain distance between the numberplate and the blinkers. With this mount the problem is solved. DO NOT PRINT IT FROM PLA. PLA is not weather / UV resistant.…
Every now and then I ride with Navi (TomTom Rider 550) on my KTM SMC-R (2019) Unfortunately, the original TomTom mount looks really shitty and is also very high. I'm also too lazy to unmount them completely every time I drive without the…
A recreation of the folding stock backplate for the SMC-9. As the original part typically breaks at the hinge point and is hard to aquire without contacting G&G directly , I decided to design this 3D printed version with works really…
Only prints one side.
Discover the ultimate in simplicity and functionality with S.M.C. our Small Multifunctional Clip. This sleek, compact accessory combines the convenience of a bookmark and a paperclip in one minimalist design. Say goodbye to clutter and…
Created this for a friend as they did not like how the Vero V looks. Top should be printed from the flat side and same with the Base (They should be oriented correctly for printing already). Supports recommend for the rectangular…
I wanted to print this model for my father but wanted to give him the option of displaying it on a shelf or hanging it. The model printed great in Overture Black PLA. 0.2 First layer height. 0.24 Fist layer width 0.15 for all other…
Adapter for the robot KUKA VKR16 R1610-2 (CYBERTECH) to hold the gripper SMC MHZ2-25C. The blueprints of the gripper are on the photos.
Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR Support ZWO EAF and ZWO ASiair OpenSCAD source code on GitHub BOM 1x Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR 1x PK-EOS Mount Adapter Ring 1x ZWO…
english: Because I am too fat :), I bought a lightweight battery ( http://www.asn-shop.de/Motorrad-Batterie-132V-5Ah-V3-4s2p ) for my KTM SMC-R 690. The new battery is way smaller than the original one, and so i designed a insert for the…
This works with the original hardware such as: Brass bushing Threaded rod Folded stock spring, plunger pin No post-processing required apart from a little force when inserting the brass bushing and the threaded rod. Recomended settings:…
The mount is designed for a single illuminated push button (see https://eckstein-shop.de/QITARuggedMetalPushbuttonwithBlueLEDRing-16mmBlueMomentary ) and contains an overhang to place it behind a wall-mounted shelf (so that it cannot move…
Remix to add holes for mounting in a Leviton SMC. Pattern for mounting to one side or central in the cabinet.
I needed a simple way to secure my pi zero to my network cabinet.
Needed a way to connect Canon FD/FL lenses to a RED Brain and still have the infinity focus. Adaptor rings (EF-FD) won't work due to the different mount distances, so I designed a completely new RED Mount. It is supposed to be used as a…
This is a 0.8 MOD gear 65T for Pentax SMC600 F4, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or ZWO EAF stepper motor with 54T gear…
I picked up an SMC-PAD for pennies, but as the saying goes, "you get what you pay for"—the sensitivity leaves much to be desired. Looking for a budget-friendly fix, I stumbled upon OwlMuso's video about using electrical tape to adjust the…
I created this Ornament disc for my father who is retired Marine Corp. He wanted something to hang from his truck mirror, so I modified a disc plate I had made and scaled it down. I added a thru-hole to loop paracord or a strip of leather…
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
Changes I made to the existing design from fablab-berlin: made the flap that connects to the camera thinner, in order to mount it between the camera and a stand plate. Enlarged the radius of the cap so it fits tighter. did not pay a lot…
This bracket allows you to mount an EU license plate bracket on the stock tail of the KTM 690 SMC-R. If you remove the original long tail that holds the stock license plate, this bracket allows you to position the license plate higher,…
I have a Leviton 47605-MDU where I terminate the network stuff in my home. I wanted to use the TRENDnet Ethernet over Coax 2.5Gbps Adapter (model TMO-312C) and I didn't want it just hanging in there. This bracket allows you to snap it in…
This is a precision-engineered lens cap designed for the SMC Pentax 15mm f/3.5 Ultra-Wide Angle . Since original metal caps are rare and expensive, and standard "snap-on" caps can easily scratch the finish of the integrated metal flower…
its a model of the Halo Spaceship USMC Ship in Amber Clad
Drilled an M3 hole through the base where the pins broke off. The pins have a slot for a square M3 screw. Used M3x18 screws.
This is a single-color print of CosMc. Recommend you print in white PETG and then color using acrylic paint markers. (Note the spaceship shown is just a prop--only the CosMc character is included in the build.)
Grip backstrap and magwell addition to the GTP-9 pistol lower. Backstrap is a similar to the OEM however there is no hopup tool storage, there will be a blank model as well as a pattern profile to emboss a custom grip texture and a base…
Just made a simple case for the RED DSMC3 7inch monitor to protect it while traveling Tip : cut and tape a piece of paper inside to protect the screen from scratches
Use this threaded mount to determine the distance between the sensor and the lens. Printed in PLA 0.12mm without supports for the thread
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
![Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR](https://media.printables.com/media/prints/1116201/images/8431782_befdcc04-f9f2-4a85-bdd8-38d52b944702_41af4cad-e170-4f1c-aa6a-d68827a15950/p18-135-01.jpg)
