SMC-PAD Sensitivy Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Resolve SMC-PAD sensitivity issues using this custom DIY insert!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
I picked up an SMC-PAD for pennies, but as the saying goes, "you get what you pay for"—the sensitivity leaves much to be desired. Looking for a budget-friendly fix, I stumbled upon OwlMuso's video about using electrical tape to adjust the pads.
I wanted a more "precise" solution, so I created this 3D-printed insert. Follow OwlMuso's video to disassemble the unit (WARNING: THIS WILL VOID YOUR WARRANTY. DO THIS AT YOUR OWN RISK). Instead of using tape, place this insert between the silicone pads and the graphite-transparent sheet. Reassemble and enjoy!
Print Settings: Print in TPU. I used a single 0.2mm layer, but two 0.1mm layers (perhaps with ironing) might provide an even smoother result, though I haven't tested that yet. Pull gently from the heated bed to prevent tears or deformation.
Full disclosure: The image of the printed model was AI-generated because I didn’t want to take my SMC-PAD apart again after installing the insert. However, the 3D model itself was entirely human-made.