APC SMC1500I Bezel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
APC SMC1500I Bezel 2x M3x20mm bolts required to piece the front together. I tapped the PLA to thread into and it's…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 80
- Makes
- 1
- Views
- 747
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
APC SMC1500I Bezel
2x M3x20mm bolts required to piece the front together. I tapped the PLA to thread into and it's plenty strong enough.
I've yet to get around to filler/paint but the body of this is good enough to share for others to use.
The foam is merely air filter foam sheets from ebay
Supports only required for the bolt mounts, print the two bezel halfs face down
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: Tin Morry PLA Black
Notes:
Supports only required for the bolt mounts, print the two bezel halfs face down
Category: Computer