Counting matching models…
This is a toy for cosplay or display purposes only! Never brandish this as a real weapon or bring it out in public, this is a toy modeled off of a REAL LIFE firearm, treat it as such. Just because you know it's a toy, doesn't mean other…
EN: Simple carabiner with safety lock against opening and slipping out in three sizes. It is a plastic product - it cannot be used instead of a real metal carabiner! Rather suitable for hanging toys to a baby stroller etc. CZ: Jednoduchá…
This is the Rush. It's light, handy, smooth, and can reach up to 220. It uses less than a kilo of filament (even with the stock), can be printed within 24 hours, and uses simple and common hardware. It takes angled Talon magazines.…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Seeing things like the Shidan and similar extended barrel Gryphon remixes, I liked the look of it and was inspired to create my own take on it. This one has a slightly longer barrel (it's 78mm longer) than most currently existing…
ATTENTION: In order to see if this file works for your 3d printer. Please print the Rail_Test.stl file first. If you downloaded the old files, you need to Scale them down to 10% I've designed this Carbine Kit for the SSX23. The SSX23…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…
u need to buy a 30x8x0.5mm spring kupple of bolts and nuts in m4 and m5 and superglue and a 8mm aluminium rod
ITS A SPREAD ONLY This is a Mini RONI style attachment that can be attached to any Airsoft pistol and converts it to a cool futuristic CARBINE lookalike as long as there is a P-Rail attachment on the pistol. This is only a case and does…
3D print AIRSOFT HICAPA 5.1 conversion kit For Tokyo Marui owner You don't drill side hole of the lower frame. You have already hole from factory for install rail. Drill 2 holes for insert M3x8 small taper screws through it for combine…
This is a toy for cosplay or display purposes only! Never brandish this as a real weapon or bring it out in public, this is a toy modeled off of a REAL LIFE firearm, treat it as such. Just because you know it's a toy, doesn't mean other…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Really like this design but the screw hole was a bit "over-sized" for a 4-40 x 1/2 screw. Put some more "meat" in the holes and reduces the nut size so it properly holds a 4-40 nut and won't spin. With the more meat the screw does not…
Redesigned version of glock carbine kit, that i made for my ssp18, lightweight and compact. I printed it with Pla+ and 6 internal walls, main body need support. Airsoft use only !!!
NOTE: this is not a gun magazine - it is a mock attachment to make the 10 round box mag look like an M1 Carbine mag. If you have a 10/22 with the M1 Carbine stock, the M1 Carbine mag extension by death4u helps to complete the look for…
Now take a look at that thing! Saw it, loved it. Evenso the Creator intended to CNC it out of wood, he offered his design as it should print just fine as well. You can check out his howto blog and also dont forget to leave him a like!…
I got the inspiration for this from rpf2000. I wanted a Ruger PC9 magwell, but didn't exactly like the design. I created this, with a wider angle, tighter fit, and a smoother look. With this magwell, you will have no problem reloading…
This is a variation of the EE-3 Carbine with a shorter stock (Not an exact copy of Boba Fett's EE-3). I've organised all the parts into separate plates ready to print in their optimal orientation. Most parts were designed to need very…
I have had great success making these of PLA with 3 perimeter walls and 20% fill. Print picc rail down with supports and you should be fine. You can also order them printed and with all the hardware installed at the targetforge.net…
An AR15 stock that fits on a mil spec carbine buffer tube and is the same general shape as a colt 607 carbine. It requires a Magpul MAG333 Sling Mount Kit, a QD sling swivel, and a 5/16-18 socket head screw with 30mm of threads to work…
It's a spread of model made by MUSSY. Zestaw do konwersji karabinka MINI i DUŻY PDW można przymocować do dowolnego pistoletu Airsoft i przekształcić go w fajną, futurystyczną wersję karabinu pulsacyjnego M41A, o ile pistolet jest…
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm. Supports didn't apply the best so suggested that you edit the supports before printing.
Here are some custom variants of the DC15S blaster from the Andor / Mandalorian season 3 flashbacks. These are the base DC15S carbine as used by the Imperial clones in Andor (and in the Mandalorian order 66 flashbacks) but with the scope…
I liked the Juice cheek rest design and changed it up to be a bit smaller and support free. I printed mine with 10 walls of PA-CF but other materials are probably fine. The CF gives it a nice texture. Hardware list from original: 1x 80mm…
Carbine kit for the Airsoft P226 AEP
Remixed that awsome design to use an AEG handguard, buffer tube + stock. Its designed to use a vsr10 / mb03 / ssg10 rail. parts needed: 4x m3 heat insert for the rail m3 long screw bar or m3 12mm + heat inserts Category: Toy & Game…
This is a dummy extension for a Ruger 10/22 mag to make it look like a m1 carbine mag. It also makes it easier to insert and remove the mag. After printing glue the extension to the mag. For more information on a 10/22 m1 carbine…
All the pictures of the printed parts are of an older verion. The files have been slightly. Biggest differences to the pictures are in the upper part of the frontgrip (nicer transition from grip to body) and an additional tool compartment…
I have printed the 1/6 scale one. and let me tell you that is tiny haha. but im amazed about the detail. Btw my imperfections are probably because im not a specialist in printing figurines and the fact I use PETG will not help either so…
I needed a height adjustable MDT style cheekrest that would fit an AR buffertube to go along with the printed “MDT-like buttstock for Savage B22 Precision” Aquilo created. I used and remixed/resized the thumbwheel they had made to fit the…
Introducing the Fishbone 23. A bullpup carbine kit for the SSX23. I've used the SSX23 high power version for this one. It might work with the MK23 as well. Assembly manual is included in the files and has the most information. But I list…
A box for 50 freedom seeds for the .30 M1 Carbine.
Turn your SMILEY into a lookalike historic piece from World War 2. Adds a considerable amount of weight to the front, over 600g of filament, so keep that in mind. Includes mock iron sights and backup iron sights if you do not want the…
3d model Hi-capa 5.1 carbine kit
This magazine follower gives the King Arms or Air Venturi airsoft M1 Carbine a bolt stop feature after the last round is fired. The stock airsoft gun does not have a bolt lock on the last round. This follower also has a much larger grip…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
IMPORTANT: There's a V5 attached for stronger ''Stability Bar'' parts. Beefed up a bit and still works with the open holster flawlessly. Here's my take on a lightweight, foldable stock SSX23 Carbine Kit. Yes it still fits the SSX23…
The Dilemma (Quick story) I built my AAP01 for indoor use, unfortunately with no more indoor fields in my city, it was two options; either sell the AAP-01, or see if I can modify it for outdoor use. (check the last photo for what it…
Also known as the Minie' or Minie Ball this projectile was designed for the new French Rifled Muskets designed by Claude-Etienne Minie' that became popular in the Crimean War and later the American Civil War. This model depicts the rarely…
This is a remix of the 40mm spacing Carbine flywheel cage and flywheel cover, of the Nerf Gryphon by Flygonial, to support Banned Blasters Banshee flywheels. It is UNTESTED as I do not have any spare Banshee wheels at this time, and I am…
With interchangeable plates and grips for all your hexagon needs, this stock has a relatively tight length-of-pull and is tall enough for good scope alignment. Bed the top with some flexible adhesive or RTV to reduce vibration/noise from…
A Carbine Kit for the KWA M11A1, to modernise it with an optics mount and better ergonomics. Available in righty / lefty. I recommend to print it in PLA or PETG. All models are orientated for optimal printing. Print Settings are attached.…
The files contained in this release are for an airgun. They are not, and cannot be converted in any way to be, compatible with firearms. Initial Release. These files were developed in response to my frustration with the 11mm dovetail…
This is a set of plates to make the stock of the Hi Point Carbine look better. They can easily be installed with a set of Chicago screws or, if necessary, with a small dowel rod. I recommend the screws because gluing in the rods will be…
Trying to balance utility and width, this improved furniture is designed to clear its full sweep even with one of my standard or extended suppressors attached. Though most factory units are attached with roll pins, this model has recesses…
I designed this for a friend and couldn’t find any models for one so I am sharing it with all. This is a work in progress and I have not verified it to work yet.
This is a block to go in the 20 rd M1 Carbine magazine to limit it to ten rounds. This can then be pinned in the mag if needed using a a drill and a pop rivet. If you need to adjust how many rounds for hunting restrictions just scale up…
It's a simple carbine nothing more nothing less.
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Update 20261004: Changing the latch of the folding stock to spring up instead of down to prevent dislodging when priming Also edit BOM and instructions to use M3x14mm…
This box is for Ruger 10-22 BX-1 magazines with M1 Carbine mag extensions. This box will hold either one tray with 6 mags with extensions OR two trays with 6 each unmodified BX-1 Mags (this was not my main purpose - so they may touch each…
The design is meant for a 15 round magazine of a M1 Carbine .30. It limits after installation a 15 round magazine to 10 rounds. Installation instructions: 1. Remove the bottomplate of the magazine. 2. Insert the limiter into the spring.…
Here's a box for storing your .30 M1 ammunition. It's easy to print. The two main parts of the box print together as a single unit because the hinges are interlocking. This box requires no screws.
TPU bitholders with capacities for 10 or 20 bits, and optionally, one bit extender. Designed for ¼" hexagonal screwdriver bits about 1" long. Designed for a snug fit, expect the bits to stay in place hanging on a toolboard or in a…
I'm working on a sort of overbuilt carbine conversion for Captain Slug's HYPR, because I can't help but overdo everything. I'll have better photos once my hardware kit comes in. Category: Toy & Game Accessories
this is a model I made for the Lepus by Jackrabbit Nerfer and sold by frontline foam that extends and adds rails to the barrel.
Redrew a sketch based on a 30MM weapon, then made it into a model.
These are remixes from https://www.thingiverse.com/thing:4883607 By Esteran I really like The carbine stock from Esteran but I want something more classic WW era looking and maybe more variations to the designs will be great. There are…
Hello Tribe, I have created a Weapon for 28mm scale Heroic. Please Enjoy if you would like the complete set please visit https://thangs.com/The-Free-Heathen-Workshop/FHW-Coil-Inversion-Personal-Weapon-set-v11obj-26003 Cheers Maker…
Use the detent tool https://www.printables.com/model/1150135-safety-detent-tool-for-ruger-pc-carbine-and-22 when removing the cross-pin or you will have to use it later to re-install the detent and spring (and there is a very real risk…
The help avoid having the spring go boing, or to re-install it after this happened.
UPDATE: Revised scale Here are the open and folded stocks from my total noob attempt to make the DC15-S from Star Wars. These can be used for altering existing blasters. Length can be adjusted by simply cutting a section out of the arms…
This is a set of models for the Nerf Gryphon by Flygonial. These files will let you use Worker Hurricane flywheels or Kuryaka Pulsar flywheels with the longer barrel and a lot of picatinny rail. The 33.5mm spacing is intended Hurricane…
This is a remix of Shrub's SMILEY that looks like the Mannlicher M95 Carbine and takes straight talons. You will need to counter-sink some of the holes. I did not use the brass piece in the breech, I only used the brass for the pusher and…
UPDATE: realised I forgot to correct the trigger guard on the game versions. Check updated files for corrected versions. This is a remake of my Battlefront 2 classic (2005) DC15S blaster. This version improves the accuracy and fixes some…
Ruger PC Carbine / Charger Bolt Buffer pad for the TandemKross buffer upgrade, The pad wears out, and you can't purchase it separately. TPU, you can experiment with your own density's as far as infil, walls etc. i have 2 walls, 4…
Re-Fork is a carbine form factor half dart blaster designed to feel nice to hold and take standard attachments through Picatinny rail and M-Lok mounting. Note: This is my first blaster design, so there are absolutely going to be flaws.…
Drapeau de sécurité pour carabine USM1 ou M1 Carbine. Il est fait sur mesure pour se chambrer parfaitement.
support murale pour carabine ou fusil. wall mount for rifle or shotgun.
Done with the clamshell for the spa master, now I will work on a foldable or fixed stock. for the clamshell to fit you need to cut of the front "iron sight". I will add a replacement picatinny rail instead of the back iron sight that can…
Disclaimer: Laws regarding airgun shrouds and moderators vary by country and/or local jurisdiction. Although it is legal in a lot of areas, make sure to check if it is legal before printing. This is not easily adaptable for any firearms…
Remix of the Utility Carabiner v2, just deleted the big holes, added small ones and bent spring steel wire to shape. Might need to drill the hole for a better wire fit. NOT INTENDED FOR CLIMBING, WILL NOT SUPPORT HEAVY LOADS All credits…
This is a replacement baseplate for a Ruger 10 round magazine that comes with the PC9 carbine. This will allow the short mags to be converted so they can be used in the Ruger Security 9, non-compact model pistol. I have not been able to…
This mod for the Dart Zone Volcanic replaces the top priming grip with an attachment that allows for pump-action priming using any forward grip that can be attached to standard picatinny rail. No additional hardware is needed, but the…
Here is my custom version of the classic Battlefront 2 DC15 carbine with added scope. I already updated the trigger guard prior to uploading but the renders were made before that so keep that in mind. It comes in 3 types: Closed stock,…
Simple 16mm bore of the caliburn TK front magwell to allow the barrel to be in proper position for a caliburn carbine u. U-channel lengths for a caliburn carbine u is in-between a caliburn and TC with stock length. Remix of…
We use a hammock to put the children to sleep. But over time the carbine started to creak when put to sleep. That's why I created this model. I recommended print in PETG. Default stl file is for carbine with inner size 24mm and 7.8mm…
doesnt need supports i printed it at 75% infill but you can go higher slots nicely ito place and doesnt fall out
Simple print, made for double-color printing. Just choose your favorite color, print it and stick to your gun box with double-side adhesive tape. Be aware of line thickness in your 3D printer settings. Can be use also as wall decor.…
This is a magazine block for a 9mm Ruger PC Carbine. The rifle can not fire with this installed but it does not satisfy the requirements for some competition shooting orgs because it does not fill the chamber. I may or may not add that…
This is my remix of Maverick0197's Handguard, made to fit an Alfa Proj Carbine. Fits 22lr model, should fit other carbine models (22wmr, 9mm, 357mag and possible other cals available in Europe). Please note this is NOT for the "Hunter"…
RC1 Buttstock Decal ‘RC1’ is in a bold Asul font; the rest in Gidolinya . The smaller size of the other letters turned out terribly difficult to work with, so I ended up using only the 'RC1‘ part. Reeder Handguard Label The ‘Reeder’ label…
These are to replace the Proline Carbine center hubs by a more realistic look.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
PEWPEWPEWPEWPEWPEWPEWPEWPEW - Vestige Carbine, Halo Infinite
3 piece mock suppresor for dead air flashhiders. (I dont know if the mounting i designed is same or similiar to the real deal)
This is just a way of adding a stock to the Replicant by Leedledynamics, assembly is the same as with the Original. This is a Remix of Replicant! Have fun, and if you print it, please leave a Like and a Make. Loadout pictured: Replicant:…
18 round capacity, and can be speedloaded if you have a right-angle speedloader attachment. And yes, it actually fits in M1 mag pouches. You'll need to steal a spring from a 30-round airsoft shotgun shell. I've attached a picture of the…
Barrel rest for your carbine or shorter arms. Uses a 15x3mm magnet, so that it can be adjusted to any height in your safe.
I used a utility knife a long time ago to clear space inside the stock foregrip for an aftermarket barrel, but it didn't leave clearance to slide the hopper forward to expose the action. This provides for the necessary clearance along…
I dropped my original bolt on the floor somewhere and haven't found it yet. I lengthened it a little and added a spherical cut-out for the forward portion to cup the paint to increase surface area and try to be a little more gentle. I…
Reduces the contact angle between the stock and your body while increasing the contact area for improved stability. Includes an optional sling attachment point. This screws in from the opposite side, requiring shorter screws on both sides…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. It is not 100% accurate in details, but proportions are true to original. Requires glue and metal…
Handguard for the Novritsch SSP18 featuring M-LOK slots and a full-length Picatinny top rail. Uses M3*30 Screws and M3 Nuts. Includes Inlay for the Picatinny rails to reduce wobble 3D printed in PLA with 0.2 mm layer height, 0.4 mm line…
hi point carbine charging handle is larger for a better grip
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm. Supports didn't apply the best so suggested that you edit the supports before printing.
The Dilemma (Quick story) I built my AAP01 for indoor use, unfortunately with no more indoor fields in my city, it was two options; either sell the AAP-01, or see if I can modify it for outdoor use. (check the last photo for what it…
