1 / 2
Umarex Notos Carbine Magazine holder PLUS+ — image 1
1 / 2

Umarex Notos Carbine Magazine holder PLUS+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This block will hold your magazines, shot tray, and fill probe so everything you need is with your Notos

Rating
0 / 5
Likes
29
Downloads
269
Makes
1
Views
1,938
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

I have had great success making these of PLA with 3 perimeter walls and 20% fill. Print picc rail down with supports and you should be fine. You can also order them printed and with all the hardware installed at the targetforge.net website. You will need 3 .2" dia X 1/16" thick rare earth magnets and one each M4 SHCS w/hex nut. Magnets MUST be installed so they attract the ones on your magazines and single shot tray. How deeply you push the magnets into the block will affect how firmly the items are retained against the bottom of the pockets. You can also order them ready to go here:

https://targetforge.net/shop/ols/categories/umarex-notos-accessories

PS - To get the right fit for the probe storage area, you will need either a 7mm drill bit or reamer. The reamer makes the hole the perfect size and also make it super smooth inside. All the units I sell are reamed to maximize fill probe o-ring life.

 

Tags