AIRSOFT - HICAPA 5.1 - carbine kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carbine kit for AIRSOFT HICAPA model This is first design. OPEN for comment and develop. Please feedback me for develop.
- Rating
- 5 / 5
- Likes
- 100
- Downloads
- 481
- Makes
- 0
- Views
- 4,091
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3D print AIRSOFT HICAPA 5.1 conversion kit
For Tokyo Marui owner
You don't drill side hole of the lower frame. You have already hole from factory for install rail. Drill 2 holes for insert M3x8 small taper screws through it for combine your gun and carbine kit together
Printing
I designed it simply to make it easy to print. It's just not a strange facing.
I use 15-20% infill and 3 wall thickness
For upper reciever_tail & extend_plate_stock use more 3 wall thickness & more infill for less flexibility part.
Core_reciever part, You should cut along longer side by 50 mm. from close trigger side.
Hardware
- ~ 40 Thread Inserts (most of the hole not hexagon)
- ~ 20 m3x6 screws (for install side cover)
- ~ 20 m3x10 screws (for install lock mechanism and under barrel rail)
- ~ 10 m3x16 screws (for connect front and back of carbine structure)
- ~ 5 m3 nuts
- screw driver or hex key (according to type of head of screws, up to you!!!)
What do you get?
- Long Picatinny rail for install another accessory Ex. Optics or Flashlight
- Short rail Under barrel for install Grip or any attachment
- Extendable stock and simple lock mechanism
NOTE
I don't have installation guide now.
You should educate yourself and do it yourself.
Drill 2 holes for insert M3x8 small taper screws through it for combine your gun and carbine kit together
This is my prototype. I test with candy color filament that's look cute(picture above). The new version coming soon.