(Bosch) Jigsaw blade storage boxes (small laminate and diverse 5x2 compartment holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to fit the tiny laminate blades T101AOF and diverse other blades (widths 8 - 9.4mm and lengths 115 - 135mm).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues.
The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and secure fit afterwards and still comes off without too much of a fight. Make sure there is no seam on the lid fitting bit, that might have made it tight for me. The larger lid, I just sanded a bit with P320 and is now perfect!
My Bosch blades are around 1.3mm in thickness, which means for the larger 5x2 compartments box, you can fit 2 blades per compartment. For the metal/wood largest ones, you just have to flip one of the blades to be able to fit 2 in one compartment.
Thank you for the original model to the creator! Have fun :)