Makita Miter Saw 2.5" Dust Port Relocation - LS1219 / LS1219L / LS1019L
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust adapter for makita miter saws, moves the connection port to the base of the saw and allows for a 2.5" connection.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 660
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a better solution for the dust colleciton on my Makita miter saw. First and foremost I wanted to move the connection point from the top, sliding portion of the saw down to the bottom and I also needed the ability to connect a 2.5" flex hose.
@TobiHoher's adapter was close, I just modified the original to work with the 2.5" / ~63mm hose.
I also leveraged this model by @Prune_1804316 https://www.printables.com/model/1137981-makita-ls1219-ls1219l-ls1019-ls1019l-rear-vacuum-a using the top plug from that model as a clean way to hookup the hose down to the lower dust port while removing the original vac connection. There are also plugs out there to just plug the top vac connection port, but I like the clean look of the new adapter.
I printed this with the flange on the bed and supports on (not sure they were strictly needed)
