SUP Stand Up Paddle Board Handle (ø24.1mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ergonomic handle for a spare SUP paddle.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed it to fit tightly enough that it doesn't need a clamp or other keeper mechanism.
Printed in PETG: 0.4mm nozzle at 0.2mm layers, 6 walls, 25% gyroid infill.
I did print it vertically with a 20mm brim for stability. The overhang was just enough that the underside of the grip is a little less smooth (uncalibrated PETG). It works out well because non-slip is helpful on a paddle. I did have random scarfed seams on to increase the texture a little. Also may add intentially grip lines on the inside curve after a few field trials …
All that said, next time I'll probably print it horizontally with supports, mainly for linear strength. Either way for a light-duty spare paddle, this is a perfect ergonomic handle.
If you need a diameter other than 24.1mm, join my club and let me know!