SUP Stand Up Paddle Board Handle (ø24.1mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An ergonomic handle for a spare SUP paddle.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 62
- Makes
- 0
- Views
- 255
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed it to fit tightly enough that it doesn't need a clamp or other keeper mechanism.
Printed in PETG: 0.4mm nozzle at 0.2mm layers, 6 walls, 25% gyroid infill.
I did print it vertically with a 20mm brim for stability. The overhang was just enough that the underside of the grip is a little less smooth (uncalibrated PETG). It works out well because non-slip is helpful on a paddle. I did have random scarfed seams on to increase the texture a little. Also may add intentially grip lines on the inside curve after a few field trials …
All that said, next time I'll probably print it horizontally with supports, mainly for linear strength. Either way for a light-duty spare paddle, this is a perfect ergonomic handle.
If you need a diameter other than 24.1mm, join my club and let me know!