1 / 5
3rd Gen Apple TV Ergonomic Remote Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An ergonomic case that also stops accidental Siri/Search button presses.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ergonomic case for the 3rd Gen Apple TV remote.
- Includes ridges along the edges for better grip.
- Finger positioning indent along the back for hand placement.
- Raised edge around the Siri/Search button to stop accidental presses.
- Charging port open for easy access.
- Print in a matte filament for even better grip.
Tolerances on your printer should be dialed in as the model is made to be a snug fit once the case is slid on. If you're not sure, I would recommend printing the “Test Fit” model included and sizing up or down depending on your needs.
- Layer Height - .2
- Nozzle - .4
- 2 Walls
- 10% Adaptive Cubic Infill
- Variable layer height
- 4mm brim with .8 distance
- Support build plate only
- Painted seams vertically following the modeled seam that runs parallel to the ridges, and the inside corner.
The pictured model was printed using a Bambulab H2D, but I have also included Gcode for the Prusa Mk3S+.