Arduino Mega2560 + Atlas Scientific I1 Interlink Din Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount designed to allow an Arduino Mega2560 with the Atlas Scientific I1 Interlink to be mounted to a DIN Rail
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for a serial converter chip to be held in place.
It is recommended for the Base mount and the Conversion Chip mounts to be made out of TPU. The flexibility allows for the base mount to ‘snap’ into place on the rail while the flexibility is required to open the ‘gate’ on the chip mount.
8 M2.5x16 bolts are needed for the complete system (6 Arduino, 2 I1 Interlink)
6 M2.5 nuts are needed for the Arduino