1 / 2
Arduino Mega2560 + Atlas Scientific I1 Interlink Din Rail Mount — image 1
1 / 2

Arduino Mega2560 + Atlas Scientific I1 Interlink Din Rail Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a mount designed to allow an Arduino Mega2560 with the Atlas Scientific I1 Interlink to be mounted to a DIN Rail

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
157
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for a serial converter chip to be held in place.

It is recommended for the Base mount and the Conversion Chip mounts to be made out of TPU. The flexibility allows for the base mount to ‘snap’ into place on the rail while the flexibility is required to open the ‘gate’ on the chip mount.

8 M2.5x16 bolts are needed for the complete system (6 Arduino, 2 I1 Interlink)
6 M2.5 nuts are needed for the Arduino