Arduino Pro Micro case with DB9 connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact case for storing the Arduino Pro Micro with a serial connector used to convert the Logitech Shifter to USB
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed to convert my Logitech Shifter which uses a female DB9 connector to USB, since I was not going to use my G29 anymore, but wanted to keep the shifter.
I've found this simple project on Github to emulate a joystick with the shifter, but I couldn't find any models to house the Arduino and the serial connector, so I made my own. Of course it could also be used on any other project which involves this controller and connector.
You'll need 2 M3x8 screws for the DB9 connector and one M2x8 screw to close the case.
I added support for the USB port, but I imagine it would still print nicely without.