Arduino Pro Micro case with DB9 connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact case for storing the Arduino Pro Micro with a serial connector used to convert the Logitech Shifter to USB
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 71
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I needed to convert my Logitech Shifter which uses a female DB9 connector to USB, since I was not going to use my G29 anymore, but wanted to keep the shifter.
I've found this simple project on Github to emulate a joystick with the shifter, but I couldn't find any models to house the Arduino and the serial connector, so I made my own. Of course it could also be used on any other project which involves this controller and connector.
You'll need 2 M3x8 screws for the DB9 connector and one M2x8 screw to close the case.
I added support for the USB port, but I imagine it would still print nicely without.