AnyTone AT-D578UV Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved protection for your AnyTone AT-D578UV radio. Both sides are provided for simplicity.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The rails generally work well for the AT-D578UV with a minor problem; the USB port (on the left side) is occluded by the left side cage, requiring the removal of the left side to access the port (2 screws). This isn't ideal so I invite someone else to adjust the left side to address this.
I printed this with PLA because that's easy and I'm a simple person. Other, wiser, hobbyists would advise printing in PETG. I used full supports for the print and the it took over 20 hours for each side; using a Prusa i3 MKS.
Major thank you to BBoyd for creating the model on which this was based.