48 modeli
These knob design is from another transceiver of a famous brand. I like those very much, I decided to draw and adapt them for the AnyTone AT-D878U transceiver. It is kind of a difficult print, you have to have some experience. Also please…
These are printed rails for the Anytone AT-778UV. I wanted something that would protect the front knobs and mic connection as well as the rear coax connection. There are rail spacers that can be printed as well to help keep it in…
I haven't printed this model yet. I'll update this section as soon as I print/got this printed. Length: 250mm Height: 50mm
Very simple knurled knobs for your Anytone 878
Redesign of https://www.thingiverse.com/thing:5398229 with better locking/fit for radio and 32mm handlebar diameter. Feel free to download model and adjust to your needs. Successfully printed on a Prusa MK3S using - Prusament ASA Jet…
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
The rails generally work well for the AT-D578UV with a minor problem; the USB port (on the left side) is occluded by the left side cage, requiring the removal of the left side to access the port (2 screws). This isn't ideal so I invite…
I have been looking everywhere to be able to find any model or even measurements of the original head unit for my Anytone AT-5888UV radio. I finally found this and it works nice. Since Im still learning how to design with CAD, I…
Neither files requires support. I printed mine in PETG as my radio is mounted in my vehicle and I've had PLA+ warp on me before on a hot day. PLA is fine if you're setting up your radio indoors. I attached the mount piece to my dash with…
This radio holder is a perfect fit for the Anytone AT-D168 UV, providing a secure and convenient way to keep your radio on the table. I printed this holder using PLA with a 0.2mm layer height. However, for optimal performance and…
Not finding a good mount for my Anytone 878 in my Jeep Wrangler JK, I designed an adapter to slip over a VersaMount2 with a pressure fit. So far, it's held up to a couple of trails, but throwing a little glue on there wouldn't hurt…
Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably also FTM-100) Do not use too long of screws, or you may damage or destroy your radio! Side rails are 8mm thick. Rails are tall enough to leave an air gap under the radio. I…
A quick and dirty remix to create a 2 piece option for a contrasting colour indicator on the volume knob. Assemble with a drop of glue. Could do with a little more tidying up but it's my first remix and I only used Tinkercad so forgive…
Not meant to be printed. This is an accurate recreation of the bracket for reference use in models. Category: Replacement Parts
This is a battery cover for a AnyTone 868/878 or BTECH DMR-6X2 series 3100mAh radio battery. It protects the live contacts on both sides of the battery from getting shorted when tossing it into a bag. I printed it in ASA and PLA. Both…
Side rails for Anytone AT-778UV dual band HAM radio. Since radio has only one mounting screw on each side, I designed in a plastic shelf to keep the radio stable on the side rails. It looks like the radio uses 5mm mounting screws. I've…
This is just an updated version of the model made by christopher.s. I made a new hole for the screws on the side to fit.
I made a stand for my Anytone AT-5555N II CB radio. The speaker was hard to hear when the radio was on the table. Printed on Flashforge AD5M. ELEGOO Matte PLA - I was printing at 225 degrees , Table - 60, Infill - 25%. Printed without…
Update: 12/23 - Realized that I added the clip adapter on the wrong end from the original model so that it was upside down. After trading messages with another person worried about the strength of the tab, I also remixed it to separate…
Protective Slipcover for AnyTone AT-D878UV Plus DMR HT. Noticed the front of my Yaesu FT-2D was getting scratched up, so I designed slipcovers for my HTs to protect the LCD displays when you put them into a backpack. Now, I don't have to…
I like to listen to my Ham Radio while working, but it doesn't like to stand up on it's own. Enter #gridfinity. Print it however you normally print your gridfinity stuff.
Spare batteries for 878's often ship without a clip, and the clip is hard to find/expensive. So after 15 mins on Fusion 360 and a few grams of ABS later… Be warned: you'll need a couple of M2,5 screws.
I needed a stand for my Anytone 878 radio that could support the radio having a battery eliminator connected. There's enough room on the front that all the front panel buttons are accessible. The cable from the battery eliminator goes…
I bought a spare battery for my Anytone AT-D878UVII. When taking it with me, I had the problem, that I had to take care not to cause a short circuit. To protect the battery of an Anytone from short circuit, I designed a cover, which I…
A microphone holder for anytone 578 side chasis mount.
I use Anytone 578 and BT01 BT mic on my car. Since they are far away and the Bluetooth connection is very unstable, I placed the BT antenna outside with an adapter cable. The antenna interface of the built-in Bluetooth module needs to be…
I needed a way to mount/hold my BTech DMR-6X2 portable radio while mobile. This was designed for use with a belt clip and with or without a battery eliminator. I decided not to incorporate the RAM ball mount in to this design since there…
Coolers para Anytone 6666 - Radioddty QT-80 - Stryker SR-447 Nota: Corrección de los agujeros de los ventiladores, por error estaban a 31mm, y fueron corregidos a la distancia correcta de 32mm.
Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.
Hey ya'all, All holders I found were loose so drew and I iterated 5 times to make a prefect fitting on the radio, but still retain easy removal. This is based on the original battery with the original spring tension belt clip. I made the…
Holder/box for the Anytone 588 Ham radio. Work in progress. Print the feet in TPU and the rest in PETG. PLA is not recommended due to the heat from the unit. Pictures=prototype.
Handlebar holder for Anytone D878UVII radio sized for 22.2mm or 7/8" diameter handlebars.
Anytone AT-778UV / Retevis RT95 dummy model
Here's a replacement knob for the power/volume knob on the Anytone 878UV. Should also fit the 868, 878, and 878UVII. Example in photo was printed at .12mm layer height, with fuzzy skin in ABS-GF.
Port cover broke, so I modelled a new one since I couldn't find it anywhere. There is a logo on the model, but when printing with TPU it doesn't show at all. I have slightly elongated the part that goes under the battery to help offload…
A quick print to convert your Anytone mic (at least the one on the 778UV; I'm not sure how others are) from the hook style hanger to the button style like Yeasu and other use. This uses the original mic hardware. f3d file is included if…
I grabbed a set of Motorola XPR3000 series replacement knobs off ebay to replace the stock ones which are pretty meh. I had to trim the slight overhang of rubber off the bottom of both knobs to make them fit nicely. The channel select…
Installing the Anytone AT-D578UV Radio and Creating a Custom USB Cable for Code Plug Uploads Installation Hardware : For secure mounting, you'll need the following: 4x M4x10mm bolts 4 washers DIN compatible screws, reuse existing screws…
Hallo, hier ein Standmikrofon mit Stabo Schwanenhalsmikrofon.
made this to mount it in my work van, it just grips the lip on the cup holder, may work in your vehicle. feel free to do whatever with it
Uses 2 0.75" x 1/8" Neodymium Magnets. Recommend to use glue to hold in place but should friction fit as well. No supports needed recommend using ASA/ABS but PLA will work in non Heat Sensitive environments. The mount can be double sided…
A fellow ham wanted a stand to hold his Anytone BT-01 BlueTooth "HT" securely on his desktop while using the plug-in headset. The stand is printed in black PETG. The non-slick cover is printed in black TPU. The unit fits comfortably in…
Here is a custom-designed protective cage and accessory system I put together for the Avanti Grande (and similar 10m/CB radios). Whether you need a sturdy setup on your desk or extra protection for field ops and transport, this kit has…
This Gridfinity holder is designed to securely store an Anytone D168UV radio charger. The bottom includes spaces for 6 mm × 2 mm magnets, which can be glued in place to make the holder magnetic and compatible with magnetic Gridfinity…
I made a stand for my Anytone AT-5555N II CB radio. The speaker was hard to hear when the radio was on the table. Printed on Flashforge AD5M. ELEGOO Matte PLA - I was printing at 225 degrees , Table - 60, Infill - 25%. Printed without…
Coolers para Anytone 6666 - Radioddty QT-80 - Stryker SR-447 Nota: Corrección de los agujeros de los ventiladores, por error estaban a 31mm, y fueron corregidos a la distancia correcta de 32mm.
