Avanti Grande & AnyTone AT-5555 Custom Cage, Stand & Knob Pack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular cage, desk stand & custom knob for Avanti Grande, AnyTone AT-5555 & similar radios.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a custom-designed protective cage and accessory system I put together for the Avanti Grande (and similar 10m/CB radios). Whether you need a sturdy setup on your desk or extra protection for field ops and transport, this kit has you covered!
What's Included
Desktop Stand Version: Features angled built-in legs so your screen sits at the perfect viewing angle right on your shack desk.
Compact Side Guard: A lower-profile version focused on protecting the side panels, corners, and front knobs/buttons without taking up extra space.
Custom Control Knob: A matching replacement knob designed for better grip, smoother tuning, and a clean, customized look.
Quick Slicer Tip: To keep the file list tidy, only the LEFT side of the cage is included. To print the right side, just duplicate the model in your slicer and hit Mirror / Flip (X-axis) (works in PrusaSlicer, Bambu Studio, Cura, OrcaSlicer, etc.).
Radio Compatibility
Designed around the Avanti Grande chassis, but since many radios share this exact OEM frame layout, it should fit or easily adapt to:
Avanti Grande
AnyTone AT-5555 / AT-5555N / AT-5555 Plus (v2, v5, etc.)
CRT Superstar 6900 / CRT 7900
K-Poc / Maas DX-5000
Intek HR-5500
(Pro tip: Give your radio’s mounting points and knob shaft a quick check just to be 100% sure before printing!)
Recommended Print Settings
I dialed these settings in to make sure the parts stay tough and heat-resistant:
Material: PETG (Strongly recommended over PLA so it handles heat near the heatsink and resists bumps)
Nozzle Size: 0.4 mm
Layer Height: 0.2 mm Feel free to drop to 0.12–0.16 mm for the knob if you want extra-crisp grip details!)
Infill: > 25% (30%–40% Gyroid or Grid gives awesome rigidity)
Perimeters / Walls: 3-4 (Key for solid screw points and overall strength)
Supports: None needed!
If you print this, I’d love to see it! Please consider posting a Make, dropping a Like, or leaving a comment with your feedback.
73, Bye bye!
