Liczymy pasujące modele…
Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…
Use 1.75mm filament as pins. thoroughly clean the edges of the opening. use plastic glue to glue the parts together I look forward to your prints cz: Jako čepy použijte 1,75 mm filament. Důkladně očistěte okraje otvoru. Pro slepení dílů…
If you need dust protection (about P1) or an exhale filter (as per authority requirement) just print these out and attach any membrane material you have at hand, fasten with a wire and you are ready to go. Made for a friend of mine who…
Print flat side down. To install, loosen or remove screws at the far end of the GPU and at the GPU IO plate of the side case frame. install the support and reattach frame. Support me on ko-fi. Updates 2023/01/05 Removed cross beam near…
I designed a knob to replace the ridiculously small and thin one that comes on the unit from the factory.
I designed these parts to remove size 6900 bearings from my Rocky Mountain Element Mountain bike. The drift is designed to press the bearing into the extractor cup without harming the carbon fiber frame using a Wheels Manufacturing…
A adapter to replace the resin adapter that connects a NATO cloth strap to the body of a GW6900 G-Shock watch. I made this because the other models that I found broke after some time, and I wanted to make a larger version in CAD.…
PLAYMOBIL Steck Castle Arched Window Frame – Part 3007690 / 30076900 This is a 3D-printable replacement for PLAYMOBIL part 3007690 / 30076900 , the small arched window frame used in the classic PLAYMOBIL Steck castle construction system.…
This is a remix of Devon Goldstone's Rigol DS1104 wall mount brackets. See the attached quick&dirty OpenSCAD file, if you dare ;)
Summary This is an adapter so that you can use a NATO strap with your G shock watch. Definitely fits the GW6900, may work with others. The adapter takes a 24mm strap but you could change the model with tinkercad to have it take any size.…
I made this part after landing a jump a little bit too hard on my seadoo breaking the original latch base for my storage compartment. I saw this part is widely available online for a reasonable price but decided to whip up a model anyway.…
The bearings on the original fans of my reference RX6800XT started to grind. So I designed a few very simple rails that can be used to attach two 120 mm fans to the card. I first used the card in a Dan Case A4 H2O, which is why they are…
General The original Honda fuel filter with the part number 16900-MG8-003 is either expensive (Genuine Honda) or from questionable quality (China). The MANN WK 32/7 filter is readily available for less than 10€ at all (European) parts…
An easy to print PC case which with optimized design for exactly my components. 196x70x320 on front side (CPU, Motherboard, PSU) 170x65x320 on back side (GPU) Hopefully others will also find it useful. Due to flat printing without top and…
Here's a simple adapter that sleeves down a 6900RS bearing (10mm ID) to a 608 bearing (8mm but for a tight fit, it's sized tighter to 7.6 for a more permanent fit). PETG will allow for some flex without breaking. Not sure if PLA will…
replacement casing for netgear r6900 router
I didn't have any spare 608ZZ roller bearings on hand, but I had a number of 6900ZZ roller bearings. The 608ZZ has an outside dimension of 22mm and an inside dimension of 8mm. The 6900ZZ roller bearings have an outside dimension of 22mm…
Made these for a used CURT 16900 5th Wheel trailer hitch that was missing its original sound dampening pads, this eliminates the 2mm gap between hitch and rails when towing. The pads fit snug between the hitch and rails eliminating…
Summary This is an adapter so that you can use a NATO strap with your G shock watch. Definitely fits the GW6900, may work with others. The adapter takes a 24mm strap but you could change the model with tinkercad to have it take any size.…
I didn't have any spare 608ZZ roller bearings on hand, but I had a number of 6900ZZ roller bearings. The 608ZZ has an outside dimension of 22mm and an inside dimension of 8mm. The 6900ZZ roller bearings have an outside dimension of 22mm…
A adapter to replace the resin adapter that connects a NATO cloth strap to the body of a GW6900 G-Shock watch. I made this because the other models that I found broke after some time, and I wanted to make a larger version in CAD.…
This model is compatible with the lego system.
