1 / 5
Anytone AT-D878UV w/ Battery Eliminator Cradle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a stand for my Anytone 878 radio that could support the radio having a battery eliminator connected. There's…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a stand for my Anytone 878 radio that could support the radio having a battery eliminator connected. There's enough room on the front that all the front panel buttons are accessible. The cable from the battery eliminator goes down the cutout in the back.
This also works great with the Anytone 868.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
No
Resolution:
.2mm
Infill:
20%
Category: Electronics