1 / 1
Basket Stand for 6-Cup Bialetti Moka Pot — zdjęcie 1

Basket Stand for 6-Cup Bialetti Moka Pot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for holding the basket of the 6-cup Bialetti Moka Express espresso maker when filling with ground coffee.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Stand for holding the basket of the 6-cup Bialetti Moka Express espresso maker when filling with ground coffee. Designed to print without any supports.

There are two versions of the model - the first one, shown in the photo, matches the full height of the basket. The second is a slightly shorter version which makes the basket a bit easier to take out of the stand by reducing the height of the “spines" at the top.

Print Details

I printed with PLA, 0.2 layer height, 15% gyroid infill, no supports. Probably 10% infill would be fine as well, but 15% is good for the extra durability.

Tagi