Basket Stand for 6-Cup Bialetti Moka Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for holding the basket of the 6-cup Bialetti Moka Express espresso maker when filling with ground coffee.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for holding the basket of the 6-cup Bialetti Moka Express espresso maker when filling with ground coffee. Designed to print without any supports.
There are two versions of the model - the first one, shown in the photo, matches the full height of the basket. The second is a slightly shorter version which makes the basket a bit easier to take out of the stand by reducing the height of the “spines" at the top.
Print Details
I printed with PLA, 0.2 layer height, 15% gyroid infill, no supports. Probably 10% infill would be fine as well, but 15% is good for the extra durability.