Raspberry Pi 5 Case Cover for Armor + Fan + M.2 + HQ Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for Raspberry Pi 5 with Armor Case + M.2 PCIe 3.0 Space for extra cooling fan Support for Raspberry Pi HQ Cam
- Ocena
- 1 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This cover is designed for the Raspberry Pi 5 with the armor case and the M.2 PCIe 3.0 expansion. It includes space for an extra cooling fan, a hidden short camera cable for a cleaner setup, and support for the Raspberry Pi HQ Camera. For the case assembly, I used M3 brass heat-set inserts (installed with a soldering iron) and 10 mm M3 screws. The HQ Camera is secured with 4 M2 screws, matching nuts, and 3D printed spacers included in the files. The fit is precise, all ports remain accessible, and printing is straightforward.
- Designed for Raspberry Pi 5 with Armor Case + M.2 PCIe 3.0
- Space for extra cooling fan
- Support for Raspberry Pi HQ Camera (with CS-Mount)
- Short hidden camera cable for a cleaner look
- Uses M3 brass heat-set inserts (soldering iron into PLA) + M3 screws (10 mm)
- HQ Camera fixed with 4 × M2 screws + nuts and printed spacers
- Easy to print, precise fit, all ports accessible