Beaker Holder (Variation of diameters)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes you need to hold your beaker in place, here is a model that can help!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed something to hold my glass beaker still on a heating plate and hence the model. Printed using Prusa CORE One from Prusament PC blend natural - due to its thermal resistance to avoid potential fire hazard due to placement above a heating plate. Printed with a brim, which is necessary for the print to work with PC. Its a tight fit, held together by two pairs of M3x12+M3n.
600 ml, 9 cm diameter beaker in the picture, variations for: 6; 7; 8; 9 cm created, other variations can be generated upon request.
Attachable by a standard laboratory clamp.
DO NOT USE MATERIALS WITH LOW Tg IN USECASES ABOVE HEAT SOURCES- it could theoretically lead to parts of material falling on the plate and FIRE HAZARD.