Beaker Holder (Variation of diameters)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sometimes you need to hold your beaker in place, here is a model that can help!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed something to hold my glass beaker still on a heating plate and hence the model. Printed using Prusa CORE One from Prusament PC blend natural - due to its thermal resistance to avoid potential fire hazard due to placement above a heating plate. Printed with a brim, which is necessary for the print to work with PC. Its a tight fit, held together by two pairs of M3x12+M3n.
600 ml, 9 cm diameter beaker in the picture, variations for: 6; 7; 8; 9 cm created, other variations can be generated upon request.
Attachable by a standard laboratory clamp.
DO NOT USE MATERIALS WITH LOW Tg IN USECASES ABOVE HEAT SOURCES- it could theoretically lead to parts of material falling on the plate and FIRE HAZARD.