Counting matching models…
Working in a Biosafety Cabinet, you have very little room. You already have flask, tubes, media, pipettes, pipette tips, and all those racks to hold the tubes! I decided to make a rack that would hold multiple-sized tubes while I worked,…
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
60v 6A 400W laboratory power supply with key switch and industrial power supply rd6006 power controller 16mm key switch Industrial power supply 60v 6A 400W electric cable refer to photos for wiring we use the switch to cut off the 230v…
A simple remix of Stef26's card holder for Palm Island I found on Thingiverse. The game cards can get a bit tiring to hold, especially when you have four ressource cards sideways. The holder makes the game much more confortable to play. I…
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Printed in PETG on Prusa i3 mk3 printer with 0.4 mm nozzle. No supports required. A standard 500 ml laboratory glass bottle (see photo) can be snapped into the handle and is retained safely by the flexible tab. I colleague in my lab asked…
DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.
I made all prints with 15% infill. The material tested is pet-g. Optimal printing position: leg, single connector, double connector, middle leg grip. For a more secure mounting on the table, you can use a brim
printed in ABS+ for more strength and stability Dimensions: 110*40*40 good for tubes with 15mm diameter.
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 20h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 4 perimeters, no supports, legs are recommended to print in vertical…
We needed a proper stand for the UV lamp we use in our lab to analyze TLC plates because of safety concerns with a homemade cardboard box. A commercial stand can be quite expensive and it does not provide a real cover to minimize exposure…
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…
Printed on an FDM printer with 3 perimeters and 20% infill. Printed in PETG, but other materials (PLA, ABS/ASA) should be fine too. Thanks to kl4appdrachen and Gimble for sharing their models!
This is a lab drying rack with a metal backplate. Aimed to be sleek, made of stainless steel with plastic pegs. Inspired from systems for sale online from lab supply stores that sell for thousands of dollars. Print the pegs with 100%…
Pictured Examples printed on a BambuLab X1C (Textured PEI) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed:…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…
I use those brown 500ml glas lab bottles to store my tea. The original caps are made of black bakelite which breaks quite easily. So I made this cap which also takes the sealing insert of the original cap. I printed from PLA with 2 walls…
Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…
An open source sample rotator Dhankani and Pearce (2017) described an open-source 3-D printable sample rotator that proved very useful, but it did not have an adaptor for PCR tubes. Thus I modified the existing “rotisserie” (their term…
🎨 Colores : Ajustables a gusto del cliente (mantén los colores originales para un diseño fiel a Dexter o personalízalo a tu estilo). 🧱 Pensado para : Impresoras multiextrusor (multimaterial real). ⚙ Soportes : No requiere. 🧩 Montaje :…
laboratory/microscope glass box for storing glass with tissue sample
Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…
Welcome to Disaster Hour, starring everyone's favorite hyperactive Dee Dee. Her stance? Unhinged. Her goggles? Useless. Her finger? Locked and loaded.
Laboratory rockers are widely used throughout research in both physics, biology, and chemistry to mix and agitate liquid solutions and suspensions. One area of research that puts extra requirements on the rocker, is biofilm growth…
The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…
This model is an open laboratory stand for test tubes / laboratory tubes. It is designed for clear storage and easy handling of tubes directly on a lab bench, in a classroom, or in a home lab. The construction is a single compact piece…
Part for a magnetic stirrer with hot plate, use PLA, PETG, or ABS. Designed to work with standard optical interrupter sensors. Use black or opaque filament.
USB HUB Print settings: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES Be careful with electronic parts! I'm not responsible for what you do!
CZ (EN version follows): Občas se při výuce hodí menší stojan. Používal jsem letité stativy od Meopty, dodávané plošně do škol, ale někdy jich není dost a nové jsou nekřesťansky drahé. Tak jsem si jeden namaloval. Pro kompletaci stojanu…
This is a custom-designed 3D printed desktop housing for the SK60 / SK120 module. The enclosure is designed with functionality and ease of assembly in mind. The rear panel accommodates two female banana connectors for input connections,…
Working in a Biosafety Cabinet, you have very little room. You already have flask, tubes, media, pipettes, pipette tips, and all those racks to hold the tubes! I decided to make a rack that would hold multiple-sized tubes while I worked,…
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
60v 6A 400W laboratory power supply with key switch and industrial power supply rd6006 power controller 16mm key switch Industrial power supply 60v 6A 400W electric cable refer to photos for wiring we use the switch to cut off the 230v…
This laboratory stand is designed to hold a standard test tube basket at an angle while test tubes are collected after experiments. Instead of placing the basket flat, the stand keeps it tilted so remaining liquids can flow out of the…
A simple remix of Stef26's card holder for Palm Island I found on Thingiverse. The game cards can get a bit tiring to hold, especially when you have four ressource cards sideways. The holder makes the game much more confortable to play. I…
(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…
Printed in PETG on Prusa i3 mk3 printer with 0.4 mm nozzle. No supports required. A standard 500 ml laboratory glass bottle (see photo) can be snapped into the handle and is retained safely by the flexible tab. I colleague in my lab asked…
I made this drawer organizer insert to fit a drawer in my lab. It has no bottom to allow clearance for 20 mL scintillation vials to sit inside and still let the drawer close as it is a narrow drawer. The model should be parametric in that…
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering
A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…
I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…
Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.
Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…
Stand for Laboratory power supply, 30V, 5A, 150W, Adjustable, CEE 7/7, RND Lab https://www.distrelec.ch/de/labornetzgeraet-30v-5a-150w-einstellbar-cee-rnd-lab-rnd-320-ka3005d/p/30061863
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…
Just a normal chemical laboratory glass tube, but with the screw.
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…
Trichterhalter für 8 mm Laborstativ. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthe
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
This is a useful laboratory clamp to connect 4 pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version this is a simpel parallel version you…
Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…
How to build a laboratory scales from the PASCO or Vernier force sensor :-). BOM: 1x screw M5x45 mm 1x nut M5 1x PASCO force sensor PS-2104 or PS-2189 (or Vernier force sensor DFS-BTA) Print Settings Printer: Molestock Rafts: No Supports:…
This are long feet for the Laboratory Power Supply of Oubel. Print 2 of them. Find the Laboratory Power Supply of Oubel on Amazon: https://amzn.eu/d/eW0wxDu
Los soportes originales son universales y no encajan bien en todas las sondas. Esto provoca roturas en el soporte y problemas en las mediciones. Por ello hice estos soportes adecuados para los diferentes tipos de sondas que se ven en la…
Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…
I have been looking for a long time for a triple laboratory power supply (meaning: being able to set three different output voltages) that is not deep, but flat, so that it can be mounted on the wall or (as in this case) on a pegboard to…
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…
I like the original lab scoop , but it was a little short, and I found the print layers lead to powder getting stuck more than is ideal. Made it longer and made two versions, the closed-head one should prevent stuff getting stuck as much…
Assuming you have old laptop power bricks and/or Ryobi battery to spare. XYS3590 is affordable buck converter up to 36V/5.1A -80W This box housing two laptop power bricks 16V&19.5V = 36.5V/4.5A connected serial. The power bricks' plastic…
DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.
Breadboard holder with laboratory plugs Breadboard:…
This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…
Robo Dexo 3000 (Robot from Dexter's Laboratory) You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports and hollowed Category: Sculptures
Robo Dexo 3000 (Robot from Dexter's Laboratory) Multi colour parts (MMU) Most of the parts are printed with PLA Deep Aluminium by PanTech Category: Sculptures
Simple Lid to close the Opening of a funnel to prevent evaporation. Really specific for this kind of funnel, but might be usable for other funnels with some rescaling.
OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…
See https://github.com/michael-dark/Open-Source-Thermometer for more info. This is the alpha version of an internet-connected thermometer, designed to monitor fridges, freezers, incubators, etc. to ensure proper temperature. It logs…
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
I made all prints with 15% infill. The material tested is pet-g. Optimal printing position: leg, single connector, double connector, middle leg grip. For a more secure mounting on the table, you can use a brim
Holder for 13 vacutainer vials, easy print, no support needed
Many sampling strategies during biological or chemical incidents require custom-made solutions, which can become quite expensive when scaling up during epidemics or environmental disasters. As a result, innovative and practical solutions…
An easy to print and assemble to be used directly, be for school project or at home. Takes a small place when in storage. Laboratory Burette Holder, including an clamp for test tubes. One of the must have in the home laboratory, school…
El archivo STL viene en una escala algo pequeña, pero se puede escalar en tu laminador preferido si así deseas.
