Open laboratory Tube Rack – test tube stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Open laboratory tube rack for organizing test tubes on a lab bench, in a classroom, or in a home lab. Prints in one piec
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 46
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial
This model is an open laboratory stand for test tubes / laboratory tubes. It is designed for clear storage and easy handling of tubes directly on a lab bench, in a classroom, or in a home lab.
The construction is a single compact piece with open sides – the tubes are clearly visible and easy to reach, while the stand remains rigid and strong enough for everyday use.
Approximate dimensions of the printed model:
Length: 200 mm
Width: 110 mm
Height: 50 mm
Typical use cases:
School and educational laboratories
Home chemistry / biology experiments
Organizing test tubes on a table, shelf, or in a drawer
Print Settings
Material: PETG or PLA (for lab environments I recommend PETG for better temperature resistance)
Layer height: 0.2 mm
Perimeters: at least 3 perimeters for stronger walls
Infill: 15–30 % (grid or gyroid)
Supports: usually not needed – the model is designed to be printed flat on the bed
Orientation: print with the base down, the whole rack directly on the build plate
Usage Notes
After printing, check if the edges of the holes are not too sharp – if needed, you can lightly sand them.
If you plan to use the stand with a specific type of test tube, I recommend test-fitting one or two tubes first. Every printer has slightly different tolerances.