1 / 2
Open laboratory Tube Rack – test tube stand — zdjęcie 1
1 / 2

Open laboratory Tube Rack – test tube stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Open laboratory tube rack for organizing test tubes on a lab bench, in a classroom, or in a home lab. Prints in one piec

Ocena
0 / 5
Polubienia
13
Pobrania
46
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model is an open laboratory stand for test tubes / laboratory tubes. It is designed for clear storage and easy handling of tubes directly on a lab bench, in a classroom, or in a home lab.

The construction is a single compact piece with open sides – the tubes are clearly visible and easy to reach, while the stand remains rigid and strong enough for everyday use.

Approximate dimensions of the printed model:

Length: 200 mm

Width: 110 mm

Height: 50 mm

Typical use cases:

School and educational laboratories

Home chemistry / biology experiments

Organizing test tubes on a table, shelf, or in a drawer

Print Settings

Material: PETG or PLA (for lab environments I recommend PETG for better temperature resistance)

Layer height: 0.2 mm

Perimeters: at least 3 perimeters for stronger walls

Infill: 15–30 % (grid or gyroid)

Supports: usually not needed – the model is designed to be printed flat on the bed

Orientation: print with the base down, the whole rack directly on the build plate

Usage Notes

After printing, check if the edges of the holes are not too sharp – if needed, you can lightly sand them.

If you plan to use the stand with a specific type of test tube, I recommend test-fitting one or two tubes first. Every printer has slightly different tolerances.

Tagi