Ikea Lack adjustable foot base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed this base for an adjustable M10 foot at the Ikea Lack table, which I use as an enclosure.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 235
- Wydruki
- 2
- Wyświetlenia
- 3622
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed this base for an adjustable M10 foot at the Ikea Lack table, which I use as an enclosure. The base itself has a M10 thread - additionally you can press in a M10 Hex nut for more stability. As adjustable foots I have used these ones
https://www.amazon.de/gp/product/B01N6ZZABD/ref=ppx\_yo\_dt\_b\_asin\_title\_o02\_s00?ie=UTF8&psc=1
but you can use a different one as long as it fits to the M10 thread. Before installing, you have to drill a hole(10 mm diameter) in the bottom of the leg for accommodating the bolt length.
There is a different version with a hexagon pattern in the surface. if you are interested - check it out: https://www.prusaprinters.org/prints/13910-ikea-lack-adjustable-foot-base-hexagon
Happy printing!