Ikea Lack adjustable foot base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have designed this base for an adjustable M10 foot at the Ikea Lack table, which I use as an enclosure.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 235
- Makes
- 2
- Views
- 3,622
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed this base for an adjustable M10 foot at the Ikea Lack table, which I use as an enclosure. The base itself has a M10 thread - additionally you can press in a M10 Hex nut for more stability. As adjustable foots I have used these ones
https://www.amazon.de/gp/product/B01N6ZZABD/ref=ppx\_yo\_dt\_b\_asin\_title\_o02\_s00?ie=UTF8&psc=1
but you can use a different one as long as it fits to the M10 thread. Before installing, you have to drill a hole(10 mm diameter) in the bottom of the leg for accommodating the bolt length.
There is a different version with a hexagon pattern in the surface. if you are interested - check it out: https://www.prusaprinters.org/prints/13910-ikea-lack-adjustable-foot-base-hexagon
Happy printing!