Piper PA-32 Cherokee Six Antenna Topper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The antenna topper is designed for a Honda CRV 10mm rubber whip antenna. The hole is 30 degrees from vertical. Two…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
The antenna topper is designed for a Honda CRV 10mm rubber whip antenna. The hole is 30 degrees from vertical. Two STLs are included, one with the antenna hole, and one without so you can make your own hole. It's "kind of" scale; all the big parts are in the right places. I made horizontal and vertical stabilizers extra thick (scale stabs would be extremely thin and brittle). The windshield and nose aren't scale but for an antenna topper, it's close enough.
I finished it with wood filler, sanding, and spray paint. I made the vinyl decals with a Cricut. Satin clear overcoat.
Category: Vehicles