1 / 5
Monorail 12.25" Straight Track Disney Playset compatible — zdjęcie 1
1 / 5

Monorail 12.25" Straight Track Disney Playset compatible

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

12.25 inch long straight track (standard size) compatible with Disney Monorail Playsets.

Ocena
5 / 5
Polubienia
49
Pobrania
153
Wydruki
1
Wyświetlenia
645
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

[Update: new STL has slightly thicker outside walls]

12.25 inch long straight track (standard size) compatible with Disney Monorail Playsets.

Track prints topside-down. No supports needed. Due to the length and narrow build-plate contact, I suggest using a brim to help prevent first layer shrink and adhesion issues. Track fits diagonally on my Ender-3 Max Neo build plate.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 Max

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

20%

Filament: IIIDMax PLA Space Gray

Notes:

IIIDMax Space Gray PLA is a close match to older light gray Disney track.
Paramount 3D Game Cartridge Gray PLA is a close match to the newer 50th anniversary track.

Post-Printing =============

After removing the brim, I sanded the top side edges with 150 and 220 grit sand paper to smooth.

Category: Toy & Game Accessories

Tagi