Liczymy pasujące modele…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
There are two different types of Bluetooth app controlled motors on Aliexpress, a yellow-white version (right) which goes for 2-5$ or a light blueish gray-white version which goes for 7-8$ that is also the same as the red-black version…
8 stud larger radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360 monorail…
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
Tested print settings: Material: PETG Layer height: 0.2mm Nozzle: 0.4mm Assembly instructions: Insert hinge into main bracket body Cut a small segment of 2mm diameter wire to fit through hinge (I used a hacksaw) Screw bracket into ceiling…
STL files for monorail beam compatible with Disney HO monorails: 500 mm radius, 300 mm radius, straights, pylons Newer monorails with operating doors require coupler modification to run on the smaller radius curves. Older models should…
This model is compatible with the lego system.
8 stud offset to the left/right Also check out these other free printable files: My monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360 Monorail cars:…
This is a 16 long straight track optimized for SLA printing. This has the exact tolerances for use on JLC3dp.com. The image is in their gray resin. The piece on JLC is currently 2.35$ per piece, about 5x cheaper than original track. The…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
This model does fit the common 256x256mm printers if the track is rotated by 22.5 degrees. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks,…
You do need a bigger than normal printer for this track piece, 280x280mm or more is required. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors,…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
These can be useful but if you aren't careful this will ruin the whole "on grid" part of the lego monorail system and the non constant radius of curves. Also check out these other free printable files: My monorail designs (motors, tracks,…
This is my attempt to make adapters for the switches to work diagonally on grid. You can use this to build yard ladders or just using switches in diagonals generally. Each switch needs 3 adapters to change the connector and for alignment.…
New Lego Monorail track from Lego Education AI Sets, they will be released at the first of April, this model is made from the published design patent high resolution images, the sets have not been released yet.
Probably there are better ways to do this (teflon film for example), but this mod is still better than stock. Main benefit is that if you have a 3d printer you already have all the parts. Completely degrease the focuser shaft and focuser…
Lego Monorail has recently gotten a bit of a comeback with many vendors that sell printed track pieces and many track designs are available to download and print yourself. There is however a lack of new monorail motors, so I decided to…
This one is optimized for 3D printing , with a single reusable support piece that is inserted about 5 minutes into the print for practically perfect bottom surfaces. Requires additional attention: 1x printed PETG support . PETG does not…
So, stock TS-Optics (GSO) monorail focuser has plastic body with those stupid curves and 0 extra holes. I didn't want to remake the whole part, so i came up with this. Print this part, add two M4 threaded inserts and sandwich it on top of…
Welcome aboard the Disneyland Monorail! For your safety, please remain seated, keeping your hands, arms, feet and legs inside the cabin. Watch your children, and no smoking, please. I built this model 2001 while attending my first…
Dies ist meine modifizierte MK3 mit Bearframe, Orbiter2, E3D-Revo Micro und Linearschienen für X- und Y-Achse. Ich habe die komplette Baugruppe als Step-Datei angehängt. Die verwendete Linearschiene für die Y-Achse ist eine 393mm HIWIN…
Make sure to print it in the labeled orientation, arrows up. Supports everywhere except the antistuds/backside To replicate the Seatron marbled ramp piece, you can color it in the slicer and then print it with either a Toolchanger or MMU…
This here is a curve of radius 40, not 44 as would be required to have a perfect 16 stud offset parallel circle. If you want a circle in parallel of the original size offset by 16 studs use this model instead…
You need at least a 250mm printer to print this. Also check out these other free printable files: my monorail designs (motors, tracks, stanchions): https://www.printables.com/@cbrick/collections/2018360 other monorail track:…
You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks, stanchions): https://www.printables.com/@cbrick/collections/2018360 other monorail track:…
This is a simple version of a monorail crossing that does not need a switching mechanism or digital control. Also check out my other monorail related models: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
This will need a lot of organic supports, but hybrid supports work best if you slicer supports that. I used red Prusament PLA for the print in the picture. Also check out the rest of my monorail designs, including motors, stanchion and…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
I found similar signs and models on the web, but I wasn't happy with them for various reasons. I created this model from scratch in Fusion so I could print it with four filament colors. The sign is printed with three filament color…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Lego monorail motor replacement original connector for if your monorail motor is missing it's connector clips, as those cost way too much on bricklink. Also check out the rest of my monorail designs, including motors, stanchion and track:…
Print your own replacement doors for the Disney Monorail Playset. I printed my doors are at Cura's "Super Quality" (0.12mm resolution). After printing, the doors need to be warped to fit the monorail car. After cooling, unstick door from…
Bumper fits onto the last support at the end of the track to keep the monorail from having a tragic accident. The main part of the bumper is the file "Track Bumper v10.stl". The second STL: "Track Bumper Pad v10.stl" prints the small…
Bracket holds the Disneyland playset monorail remote control. Sits on a desk/shelf or attaches to wall with a small (6 x 1 1/4") drywall screw. STL and Fusion 360 files included. Prints right-side-up on the bed. No supports needed. Just…
Bracket holds the Disney 50th Anniversary monorail remote control. Attaches to wall with a small (6 x 1 1/4") drywall screw. STL and Fusion 360 files included. If you need a Disneyland Monorail remote bracket, check out this one:…
This is my remake of the classic auto-switching lego monorail switches with some useful additions like Y-switches. required non printable parts per switch: 6x or 7x m3x6 flathead bolt (6x for the Y switch, 7x for Left or Right) Aliexpress…
This part is needed in white if you want to replicate the seatron prototype monorail set, but it only exists in black. As the hinge part is not strong when 3d printed, I made it so you use an original lego hinge base instead of it being…
This is part one of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
This is part two of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
These are replacements for the internal parts of the monorail switch so you can repair them Also check out the rest of my monorail designs, including full switches, motors, stanchion, track and more:…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
There are two different types of Bluetooth app controlled motors on Aliexpress, a yellow-white version (left) which goes for 4-5$ or a light blueish gray-white version which goes for 7-8$ that is also the same as the red-black version…
16 stud smaller radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360…
8 stud smaller radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
I recently found a good modguide on how to modify the magazin of the railraider/monorail to improve the reliability of the blaster with nerf elite darts. Since these are the only darts allowed for certain larp events, I never used this…
There are two different types of Bluetooth app controlled motors on Aliexpress, a yellow-white version (right) which goes for 2-5$ or a light blueish gray-white version which goes for 7-8$ that is also the same as the red-black version…
This model is based off the monorail that currently runs at the Tokyo Disney Resort. It is a detailed model of the train itself. I have been on it myself so that's where I got my inpiration for this 3D model.
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
8 stud larger radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360 monorail…
I just thought it would look funny, no chance a train will run on this. 24 stud smaller radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions,…
A Monorail motor costs 50$, so I decided to design a Monorail motor adapter for normal lego motor. This adapter uses one ball bearing with the diameter of 9mm, 3mm high and a hole of 5mm. You also need 2 metal axles with the measurements…
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
Tested print settings: Material: PETG Layer height: 0.2mm Nozzle: 0.4mm Assembly instructions: Insert hinge into main bracket body Cut a small segment of 2mm diameter wire to fit through hinge (I used a hacksaw) Screw bracket into ceiling…
A replacement battery door for Walt Disney World Monorail playsets. I would recommend printing it with the curved side facing up for best surface finish. An 11.5mm screw is needed to hold the door down. The head of the screw is 4mm. The…
This is a replacement top trapdoor roof for the Walt Disney World Monorail train playset. The V2 has the curve designed in, the other file will require the part to be heated post-printing with a hairdryer or build plate and then bent to…
This is a modified version of the ceiling track brackets from AeroSavvy. I had to shorten them to go around the top of my room. There are 3 sizes, a 5 1/3", a 5 2/3" and a 6" height bracket. I used them to change the elevation of the…
This is a modified version of the monorail track from AeroSavvy. I have it shortened so if you want to run tandem tracks around a room, this track is shortened so that the tracks can corner correctly when using the wall supports from…
This is a remix of AeroSavvy's dual wall mount track support. I got rid of the inner mount so I can run two tracks in parallel around the wall of my room. I use his dual and single tracks for the curves. I use AeroSavvy's ceiling brackets…
I made two different versions, the screw version uses 5 m3x6 flat head screws (the same my switch uses), the snap fit version is made to just be snapped together. The snap fit version might be less tight depending on your printer and…
On newer monorail playlets, the station has small bumps in the track that hit a microswitch on the monorail engine to signal the train to slow down and stop. If you build a permanent track layout without the station, you can print 3 of…
[Update: new STL has slightly thicker outside walls] 12.25 inch long straight track (standard size) compatible with Disney Monorail Playsets. Track prints topside-down. No supports needed. Due to the length and narrow build-plate contact,…
When designing our basement monorail layout, I wasn't happy with the "trapeze" style ceiling mounts I've seen elsewhere. I liked the idea of a 1990's "Tomorrowland" look. I designed this ceiling mount system that accommodates both single…
Wall mount for a dual track installation. Attach to wall with small drywall screws. Slot allows fine-tuning the hight during installation. Print Settings Printer Brand: Creality Printer: Ender-3 Max Rafts: No Supports: No Resolution: .20…
Wall bracket for monorail track. I use small drywall screws to mount the brackets. Slot allows for height adjustment. No supports needed to print. Print Settings Printer Brand: Creality Printer: Ender-3 Max Rafts: No Supports: No…
Track coupler for coupling a regular length track with a short track (< 6") when a full-size support is not desired. I don't recommend using this to couple two full size tracks; they need support. Print Settings Printer Brand: Creality…
[Update: new STL v14 has slightly thicker outside walls] 22" radius inside curve monorail track allows you to run two parallel monorail tracks with curves. This track has a smaller radius than the standard Disney curve. Prints upside-down…
3 inch straight track, compatible with Disney monorail playsets. STL and Fusion 360 files included. Track prints top-down on the bed. No supports; infill % shouldn't matter; I use 15%. Photos are of my 5 inch track - I'm too lazy to make…
4 inch straight track, compatible with Disney monorail playsets. STL and Fusion 360 files included. Track prints top-down on the bed. No supports; infill % shouldn't matter; I use 15%. Photos are of my 5 inch track - I'm too lazy to make…
5 inch straight track, compatible with Disney monorail playsets. STL and Fusion 360 files included. Track prints top-down on the bed. No supports; infill % shouldn't matter; I use 15%. Print Settings Printer Brand: Creality Printer:…
Mein Sohn hat sich das Gravitrax Theme-Set Balance gekauft. Darin waren ein paar durchsichtige Monorailschienen enthalten. Diese konnte ich nirgendwo online als Druck finden. Dadurch war ich inspiriert und wollte diese nachbauen. Dafür…
STL files for monorail beam compatible with Disney HO monorails: 500 mm radius, 300 mm radius, straights, pylons Newer monorails with operating doors require coupler modification to run on the smaller radius curves. Older models should…
A half-length track for the lego monorail system. It's in the same style like the quarter track I designed earlier. Works fine with only supports in the corners (for the elevated corner-parts and the studs). Safes a ton of printing time…
A ramp for the Lego-monorail-system. It complements to my five-brick-extention for the normal ramp, that elevates the track to 10 bricks, so you can bring the tracks to a normal level again, if maybe your mountain is 15 studs high. It…
An extention for the ramps of the Monorail-system. It extends the ramp five bricks in height and 16 studs in length. New version (v1): Improved for FDM-printers with 0.4mm nozzle. v0 prints teeth are slightly too small so the train…
A quarter track for the Lego-Monorail. It's not very optimized but it works fine. I made a second version that fits onto building-plates. v13 is easier to print (with less holes) I use the grey BASF Innofil3D PLA by now, it has a pretty…
