1 / 3
Moulinex Cookeo Lid Holder – Fix for Broken Hinge / Keep the Lid Upright — zdjęcie 1
1 / 3

Moulinex Cookeo Lid Holder – Fix for Broken Hinge / Keep the Lid Upright

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A PETG-printed support for the Moulinex Cookeo, designed because my lid hinge broke. It keeps the lid upright so you can

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

This 3D printed accessory was created because the hinge on my Moulinex Cookeo broke. Without support, the lid wouldn’t stay up and always fell down when I tried to remove the pot.

This holder keeps the lid slightly open and upright, making it much easier and safer to lift out the inner pot – especially when it’s hot and full.

Designed for Cookeo

Printed in PETG for heat and moisture resistance

Reinforced structure with honeycomb pattern for strength

Quick to install and remove

Recommended print settings:

Material: PETG (PLA not recommended due to heat)

Perimeters: 4–5

Top/Bottom layers: 6

Infill: 30–40% (Gyroid or Cubic)

✅ Tested on my broken Cookeo – works perfectly as a fix!

Tagi