Volvo B234 16v Throttle Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TB housing only, the bolt pattern is ok fit. The other overall dimenions might not be 100% accurate, but functional.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model so I could make an adapter to fit he 8v intake manifold, but I wasn't satisfied with how it would be sitting on it.
It is a functional part, but might not represnt a 1:1 rendition of the original part, but the bolt pattern is useable as is and has a good fit. That is tested and proven.
I will however use this for my custom intake manifold in the future.
16v throttle body accepts a 3" hose, while having an inner diameter of 65mm.
8v throttle body accepts a 2.5" hose while being 55mm in inner diameter.
The 8v intake manifold inlet hole is 59-60mm though, depending on the casting.