P
Printablesthall72
Lego Compatible (4740.dat) Dish 2 x 2 Inverted
This model is compatible with the lego system.
- Pobrania
- 841
- Polubienia
- 35
- Ocena
- 5
Wyniki wyszukiwania: 740
Liczymy pasujące modele…
P
Printablesthall72
Lego Compatible (87408.dat) Technic Connector Toggle Joint Double with Axle and Pin Holes
This model is compatible with the lego system.
- Pobrania
- 835
- Polubienia
- 63
- Ocena
- 0
P
Printablesthall72
Lego Compatible (41740.dat) Plate 1 x 4 with Two Studs and Groove
This model is compatible with the lego system.
- Pobrania
- 463
- Polubienia
- 34
- Ocena
- 0
P
PrintablesIroncyr
Mitsubishi roof molding clip 7403A143
Model of the Mitsubishi roof trim clips that fit most Lancer + Ralliart and EVO from 2008. I did print a douzain out of PC and Nylon with a 0.25mm nozzle and it worked like an original part. The price of the original part is outrageous.…
- Pobrania
- 381
- Polubienia
- 20
- Ocena
- 0
P
Printablesthall72
Lego Compatible (87407.dat) Technic Gear 20 Tooth Bevel with Peghole
This model is compatible with the lego system.
- Pobrania
- 319
- Polubienia
- 39
- Ocena
- 5
P
PrintablesJonas89
VESA Monitor Mount (Adapter Plate) for Fujitsu Futro S740 Thin Client Mini PC
UPDATE: V1.1 has improved pin shape for easier mounting. I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.…
- Pobrania
- 263
- Polubienia
- 13
- Ocena
- 5
P
Printablesmanzel
Fujitsu Futro S740 10 inch rack mount
Quick modification of the Futro S740 19 inch mount by @d3n1zg for a 10 inch rack. Use two M2.5x6 flat head screws for fixing the Futro to the mount.
- Pobrania
- 236
- Polubienia
- 23
- Ocena
- 0
P
Printablesd3n1zg
Fujitsu Futro S740 - 19-inch modular rack mount
Description A 19-inch, 2-piece, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here…
- Pobrania
- 210
- Polubienia
- 13
- Ocena
- 5
P
PrintablesJonweb
Dell Latitude 7400 Laptop under desk holder
Another under desk or wall mount for a Dell Latitude 7400 series laptop. Suitable to avoid cooling fans block the fansm. Some side opening for ports. Small 3 mm screws all. The idea was to stick it only with double-sided gel tape but i…
- Pobrania
- 202
- Polubienia
- 28
- Ocena
- 5
P
PrintablesVictronics Elektronik
Volvo 240 740 940 cookie cutters
Do you love old volvos? Own old volvos? Or just like a cars in general. Well here you have the latest addition to you kitchen perfect for this christmas. Cookie cutters that are made to be 1/50 times the size of their normal counterpart…
- Pobrania
- 189
- Polubienia
- 25
- Ocena
- 0
P
Printablescolinodell
Philips Norelco MG3740 (Multigroom Series 3000) Charger Holder
Use your charger to also hold your Philips Norelco multigroom trimmer! This was designed around the MG3740 trimmer and included A00390 charger. You can print in the default orientation, but I do recommend printing at a 45° angle instead…
- Pobrania
- 187
- Polubienia
- 52
- Ocena
- 5
P
Printablesotto_b
Orange Juicer - 3 Sizes (420ml, 590ml, 740ml)
Orange Juicer 3D Model – 3 Sizes Available (420ml, 590ml, 740ml) Designed specifically for large oranges, this juicer comes in three sizes: 420ml, 590ml, and 740ml. Each size is perfect for extracting the maximum amount of juice…
- Pobrania
- 187
- Polubienia
- 17
- Ocena
- 5
P
PrintablesSome_Guy
Shimano TL-FH10 Dura-Ace 7400 Freehub Removal Tool
This is the EXTREMELY rare Shimano TL-FH10 Dura-Ace 7400 freehub removal tool from the 1980s/early '90s. Only 3-5 of these come up on e-bay every year and they sell for $60-100 each for what is essentially a SINGLE BOLT. Not only did I…
- Pobrania
- 154
- Polubienia
- 7
- Ocena
- 0
P
PrintablesChristian
Base Stand for Fujitsu Futro S740
i bought the Fujutsi futro S740 cheap as a home server for smart home stuff. due to it was used i got no stand with it. here are 2 options for that for every stand you need part A and part B i printed that in ABS on my Voron
- Pobrania
- 153
- Polubienia
- 14
- Ocena
- 5
P
PrintablesM0x61rC
Fujitsu Furto S740 Wall Mount
Eine Wandhalterung für einen Fujitsu Futro S740 inkl . Fixierung. Materialliste: 3x Dübel Fischer DuoPower 6 x 30 S https://amzn.to/3B8n8rg 3x SPAX Universalschraube, 4,5 x 30 mm https://amzn.to/3TCtTb8 --- A wall mount for a Fujitsu…
- Pobrania
- 151
- Polubienia
- 13
- Ocena
- 5
P
PrintablesSvenMb
Fujitsu Futro s740 feets
Feets for the Fujitsu Futro s740 thin client computer. Just use them in place of the original ones FreeCad files are added, so you are free to midify it to your needs. The repair connector is used in case the original studs are broken…
- Pobrania
- 138
- Polubienia
- 8
- Ocena
- 4,5
P
PrintablesManimal
Miller mfg Little Giant Model 740 Poultry chick waterer stand
This stand fits into the base of the Miller Manufacturing 1 Quart Screw-on Poutry Waterer Model 740 to raise it 50mm (about 2in) to reduce the amount of shavings kicked into the water.
- Pobrania
- 137
- Polubienia
- 23
- Ocena
- 5
P
PrintablesBeusekomse Baan
Replacement LAMPS & DRAWBAR compatible with Märklin (Hübner) Rottenkraftwagen 5739 / 5740 - Gauge 1 / 1:32
In 1993 Märklin released a gauge 1 / 1:32 model of a DB (German railways) maintenance train (Rottenkraftwagen.) Model# 5739 (digital) and 5740 (analog) were actually designed and produced by Hübner. They are heavy, solid models, mostly…
- Pobrania
- 129
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPablo
10" Rack Mount 1U w/ Keystone Jacks | Fujitsu Futro S740
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Fujitsu Futro S740 This bracket is designed specifically for the Fujitsu Futro S740 switch, offering a clean and secure fit in your 10-inch rack…
- Pobrania
- 114
- Polubienia
- 12
- Ocena
- 0
P
PrintablesLouis
Volvo 740 dash blank
Volvo 740 dash blank. Printed with PLA fine. Print slowly. May fit other Volovs
- Pobrania
- 113
- Polubienia
- 8
- Ocena
- 0
P
Printablesn.leinad
Fog Light Mount - Volvo 740, 760
This is a replacement bracket for the spoiler mounted fog light on the Volvo 700 series cars. The mount is made to be strong enough even if printed in PLA, but a more durable plastic like PETG is recommended. It should fit Volvo 740…
- Pobrania
- 112
- Polubienia
- 10
- Ocena
- 0
P
PrintablesCarl
Lenovo Legion y740 vertical laptop stand
Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20mm Infill: 25% Filament brand: Clas Ohlson Filament color: Black Filament material: PLA
- Pobrania
- 112
- Polubienia
- 19
- Ocena
- 5
P
PrintablesB0rax
Fujitsu Futro S740 / S7011 / Esprimo G Series 10" Rack Mount
I realy liked Tims Lenovo Rack mount and I was really glad he also uploaded the step file for it. I adapted it for the Fujitsu mini PC lineup (Futro / Esprimo G). The Keystone holes are at exactly the same place as the original Lenovo…
- Pobrania
- 111
- Polubienia
- 12
- Ocena
- 5
P
PrintablesLocalhorst86
Fujitsu Celsius M740Power 3.5" HD Caddy Rail
This is a caddy rail for 3.5" harddrives on a Fujitsu Celsius M740 Power. It has been remixed from bbountyhunterr's Fujitsu Celsius Etna D3128 SSD Caddy Rail. I have designed two variants, one requiring HDD mounting screws and one…
- Pobrania
- 96
- Polubienia
- 2
- Ocena
- 0
P
Printablesinvictus0x0
19 inch rack mount for dual HP T740 (1.5u)
***BETA*** This remix of my 10 inch rack mount for the HP T740 ‘thin client’ requested by another user, making it for a 19 inch rack, holding 2 systems instead of one. Printing notes Requires 250mm bed PETG-CF or similar heat resistant…
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 0
P
PrintablesP--JawZ--K
Volvo 940/740 MAF Housing
I have purchased a new Volvo 940, first one in 14 years. Back then I only had a stick welder to do stuff and hand tools. Now I got 3D printers, so when it was time for me to increase power in my 940 Turbo. Injectors and MAF housing will…
- Pobrania
- 93
- Polubienia
- 7
- Ocena
- 0
P
Printablesinvictus0x0
10 inch Rackmount for HP T740
***UPDATE 2/26*** Added a <BETA> small bed version, with separate ears , will just fit 200mm bed when rotated 45° 210mm build height. Requires 4 x M4 conical head screws, no longer then 15mm. to attach ears to main frame. ***UPDATE…
- Pobrania
- 89
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEvgen_001
Volvo 740 wiper arm cover
The original model seemed like a great option for me to adapt for my car. It might also fit a Volvo 940. I printed it vertically with supports for a better appearance.
- Pobrania
- 82
- Polubienia
- 9
- Ocena
- 5
P
PrintablesP--JawZ--K
Volvo 740/940 Coin Tray
A simple coin tray a friend asked me for.
- Pobrania
- 81
- Polubienia
- 3
- Ocena
- 0
P
Printablesinvictus0x0
Vented top lid for HP T740 thin client
This is a vented top lid for the HP T740 thin client, it is affixed with magnets to the metal underframe, this mod allows for better airflow. This machine can get very warm when higher power draw expansion cards are installed or rack…
- Pobrania
- 79
- Polubienia
- 9
- Ocena
- 0
P
PrintablesPayien
International windows clip 3546062C 4300, 4400, 7300, 7400, 7500, 8600
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
- Pobrania
- 77
- Polubienia
- 4
- Ocena
- 0
P
PrintablesP--JawZ--K
Volvo 940/740 3 Gauge mounting plate
Never been a fan of the “A-beam” gauge mounting cluster, former owner had loosely mounted one. So I decided this time I would just remove the ash tray and that little storage compartment which I never use anyways so. Here it is, 3 gauges…
- Pobrania
- 76
- Polubienia
- 7
- Ocena
- 0
P
Printablestlum00
Ikea Skadis Fujitsu S740 ThinclientMount
Mount used to attach an Fujitsu S740 Thinclient to an Ikea Skadis board. The depth of the inside of the Bracket is 37mm, hight is 47mm. — Printing Details — Printed on Bambu Lab X1C Regular PLA 15% Infill — Changelog — 07.06.2023 - Upload…
- Pobrania
- 74
- Polubienia
- 5
- Ocena
- 5
P
PrintablesAndreas Engstrand
Volvo 740/760/940/960 Hella E-Throttle Pedal Mount
Requires 3x M6 Nuts and appropriate length M6 screws. Some cutting of the sound deadening is required, aswell as trimming of the plastic “tray” under the steering wheel/around the throttle pedal) Only tested with Hella part number…
- Pobrania
- 74
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAndrei Gakh
arrma mojave 4s ARA320740
Для печати отлично подходит ТПУ 95А. При необходимости отверстия пройти сверлом. Печать без поддержек со 100% заполнением.
- Pobrania
- 72
- Polubienia
- 13
- Ocena
- 0
P
PrintablesITG Gear
GPU bracket 3D model file fit Dell Radeon RX7400 and Lenovo Tiny 6
Overviews This is a custom 3D printable GPU bracket designed specifically to fit the Dell Radeon RX 7400 (and similar low-profile variants) into the Lenovo Tiny series (P340, P350, P360, and other Tiny 6 chassis styles). This bracket is a…
- Pobrania
- 71
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAndreas Engstrand
Volvo 740/940 Clutch pedal bushing
Only tested with MKM aftermarket steel pedal but should be the same with an OEM pedal.
- Pobrania
- 69
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDocScott
Ridgid R2740 Belt Sander to shop vacuum adapter
Belt sanders produce a lot of sawdust. To keep my shop sawdust under control (more or less), I connect all power tools to a shop vacuum equipped with a HEPA filter when I use them. This adapter allows me to connect my Ridgid R2740 belt…
- Pobrania
- 60
- Polubienia
- 15
- Ocena
- 0
P
PrintablesVanessaE
Drybox conversion for Rubbermaid FG7M7400CHILI tub
This is a set of parts to turn a Rubbermaid FG7M7400CHILI 21-Cup Food Container into a drybox to fit a normal 20-21 cm diameter spool, up to 7.5 cm wide. I made it to store my spool of Atomic Carbon Fibre Nuclear Nylon separately from the…
- Pobrania
- 60
- Polubienia
- 22
- Ocena
- 0
P
PrintablesAndy
HP T740 vertical stand
Since I couldn't find a suitable model for a vertical stand again, I used a different design as a template and adapted it to the larger version of the HP T740.
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSpecal
Česká lokomotiva řady 740 Kocour. Měřítko G
Dieselová lokomotiva řady 740. Československá výroba, vyráběná v letech 1973–1989. Určena pro zahradní železnici v měřítku „G“ . Jednoduchý tisk. Doporučená vrstva 0,2 mm. Příprava pro LED osvětlení. Pro 2 ks továrních podvozků LGB 78 mm…
- Pobrania
- 55
- Polubienia
- 12
- Ocena
- 0
P
Printablesjwirecom109
REMINGTON 740 Foregrip Hog Hunter
The Remington Woodsmaster Model 740 is a semi-automatic rifle manufactured by Remington Arms between 1955 and 1959. There are not many aftermarket parts officially noted by remington including a forgrip. I designed a more modern design…
- Pobrania
- 52
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMojomojo
HP T740 Thin Clint Stand
I needs some stands for my HP T740 Thin Clients, the org. ones are much to big and very expensive in aftermarket. You will need 2x M2 screw to fit them. Hight is needed for some airflow. Printes in PLA, with 3 Walls and 15% infill,…
- Pobrania
- 50
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMurdogk
lego 6180 6179 6178 6205 88646 4151 33909 41740
lego 6180 6179 6178 6205 88646 4151 33909 41740
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJack Soldano
Ikea Skadis Wera 7400 Kraftform Adjustable Driver
This is designed for the Series 7400 Kraftform adjustable torque screwdrivers and will mount it onto the Skadis Holder.
- Pobrania
- 45
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFipsthedog
HP Oscilloscope Feet - Designed for Analog Oscilloscope 1740A
print two of each. Includes recess for the power cord.
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 5
P
PrintablesZendehr
SIEMENS WT74000/10
Door hook for dryer Bosch Siemens 00154074
- Pobrania
- 41
- Polubienia
- 2
- Ocena
- 0
P
PrintablesP--JawZ--K
Volvo 740 / 940 Turbo Air Filter Box
Another Volvo 940 Turbo part. I wanted a more high flowing air filter, that also sucks in cold air and is "shielded" from the warm air in the engine bay. So I came up with this tube design, that utilizes the stock hole that is not…
- Pobrania
- 40
- Polubienia
- 7
- Ocena
- 0
P
PrintablesLow-Z
Fujitsu Futro S740 SSD HDD mounting bracket
This is a SSD/HDD mounting bracket for Fujitsu Futro S740 thin clients. It is used to mount the drive in the case, connected with a SATA/USB cable that is pulled through the USB-C opening. It might be useful to shorten the mounting tab on…
- Pobrania
- 39
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFabian Alwin
Turn signal handle extender for Volvo 740
A common problem with the volvo 740 is the weak turn signal handles. This print fixes this by extending the broken part. Use a glue gun or something similar to attach the 3d print to the blinker handle.
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
Printablespasarn
Fujitsu Futro S740 - 19-inch modular rack mount (right side)
Description A 19-inch, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here to see…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJonweb
DELL LATITUDE 7400 vertical stand holder
Hello, very easy to print such vertilcal stand for latitude 7400. Regards Jonweb Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Resolution:** 0.24 Infill: 40% **Filament:** Aceaddity PLA grey Category: Other
- Pobrania
- 30
- Polubienia
- 1
- Ocena
- 0
P
PrintablesP--JawZ--K
Volvo 740 Jalussi/rear window louver fasteners
A simple locking mechanism I made for the louver/jalussi accessory to Volvo 740.
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDonald Hinton
740mm / 29" Wide Shop Vacuum Attachment - Super Mega Extendo Edition - 1 7/8" Diameter Hose
A super mega ultra extendo version of the simple 1 7/8" vacuum attachment to obtain a whopping 790mm or 29 inches of width. Perfect for cleaning large hangar or garage floors. This version prints in 3 pieces. Download the 3 pieces, and…
- Pobrania
- 29
- Polubienia
- 8
- Ocena
- 0
P
Printablesjwirecom109
REMINGTON 740 Foregrip Canada Eh
The Remington Woodsmaster Model 740 is a semi-automatic rifle manufactured by Remington Arms between 1955 and 1959. There are not many aftermarket parts officially noted by remington including a forgrip. I designed a more modern design…
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 0
P
Printablesdi_hardt
Corsair Carbide Air 740 connector mount
If you have a Corsair Carbide Air 740 you might noticed the little hatch at the front panel? I wanted to mount some additional connectors their, e.g. a USB-C connector. Because I can't find any part to mount stuff there, I modeled one.…
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBigFootPL
Expresscard 34 blank for HP 2740p
Expresscard 34 blank profiled for HP EliteBook 2740p to fit flush and house a spare SD card.
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesL7899
Nilfisk 107402774 tube holder
Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSedmikráska
Volvo 940/740 - Cover, Seat mounting (1353554)
Clips must be added with superglue :)
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAttilaSVK
Monitor Mount for Fujitsu Futro S740/S7010 - VESA 75/100 compatible
I printed my version in Prusament PETG Galaxy Black. Because of how the computer mounts to the adapter, PETG is preferred. No supports are required and it should print fine without a brim, at least on a PEI build surface with PETG. Fits…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRai
Skadis mount for Stanley stud finder S150 (STHT77404)
Besides this model, you'll also need 1x CSD_Salzburg's "Universal Hook" to attach it to the Skadis. I've printed mine with PLA at default OrcaSlicer settings (3 wall loops, 15% infill density) on a Elegoo Neptune 4 Pro. Unfortunately…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesmakeEngineeringCoolio
Volvo 740 throttle rod connector
Hello, My fuel pump gas throttle plastic part broke on my 1990 Volvo 740 Diesel so I have designed a new one, cause I needed to drive the next day. First 2 versions broke, so these 2 are the result of testing, failing and learning.…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHarsesis
Wera 7400 Torque Screwdriver Holder (7440 + 7441)
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSynapse
Lock cover FAAC 740
Part printed using a Prusa MK4S with PETG filament and a 0.25mm nozzle; print settings: "0.07mm details". Onshape link for any modifications to the small bore :…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 5
P
PrintablesP--JawZ--K
Volvo 740 / 940 Front Sway Bar Bushing
A simple model of th sway bar bushing in the front, for the 22mm diameter bar.
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBomba 1244
Volvo 740 Air vent cupholder
You have to trim the sites away a bit to make the cupholder fit. AliExpress: Auto Tasse Halter Für Audi C5 A6 1998-2005 A4 1998-2002 Faltbare Anti-slip Tasse Rack Trinken flasche Halter 4B0862534D Auto Zubehör - AliExpress 34 Amazon: Auto…
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
PrintablesFlushbug
ESRack - Module - Fujitsu Futro S740
ESRack module for Fujitsu Futro S740ESRack module for Fujitsu Futro S740 Fitting to the fabulous ESRack Ecosystem by EvilProphet Suggested Print Settings Material: PETG Nozzle: 0.4 mm Layer height: 0.25 mm Wall loops: 3 Top/Bottom shell…
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
Printablesmartin2m
Fujitsu Futro S740/S7010 SSD HDD mounting bracket reversed
This is a SSD/HDD (reversed) mounting bracket for Fujitsu Futro S740 or S7010 thin clients. It is used to mount the 2.5" drive in the case. I needed a reversed version as I am using the internal SATA (after adding power connector, SATA…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
Printablesapopticon
Logitech K740 Longer Legs
I like my keyboard to have more of an angle then the stock legs provide. Designed in Fusion 360. Printed in PETG, but probably any filament will work. Split the model into the two sides in the slicer, then lay them flat side down on the…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesP--JawZ--K
Volvo 240/740/940 Throttle Body axle seals
Some simple seals to prevent vacuum or boost leaks, couldn't find any reseller sotcking replacements for the throttle linkage side, and while I was at it I figured I could do one for the O-ring side as well.
- Pobrania
- 17
- Polubienia
- 6
- Ocena
- 0
P
PrintablesYotsen
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesP--JawZ--K
Volvo 740/940 Distributor Block off
The plate was made in 5083 cast alu, pre-milled for flatness. The round plug was made out of PET, I think it was. We do not sort our plastics well at work. The plate recieves a O-ring with the dimension of 50x3.5mm, so IDxThickness. The…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesmoWerk
W639 - Tailgate Lock Washer for A6397401535
The cheap replacement for A6397401535 i bought from Aliexpress came with a super flimsy washer clip that was supposed to secure one of the rods. It broke easily when inserting the rod. So here is a replacemement to save us from sending…
- Pobrania
- 13
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEvgen_001
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDaTePrisa
HOLZ-HER EVOLUTION 7405 CNC - rear center 140mm port dust adapter
Didn't have the right fittings for connecting the dust extractor to the third dust port on the CNC so I designed one that steps down from a 140mm hose to 110mm. There's heaps of clearance to the metal back panel.
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTORP3DO
Replacement Hook for Rear Bike Light "Trelock LS740"
Hey guys, some days ago i broke the hook of my rear light. Since there is no replacement to buy even tho you could screw the broken part of and replace it, I designed a plate, that fits on the existing light and it has a hook for the…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMilda8
Clatronic BZ 3740 CO2 Cartridge Holder
Used thread: M27 x 3. I recommend using the finest layers because the thread is much smoother than.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesXylen.C4
Logitech Illimunated Keyboard Stand K740
Some feet for my keyboard. The new ones are a bit taller as the old ones. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Other
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printableshdrodel
HP T740 Thin Client Stand Using Original Screws
Basically everything the same like original except the holes for the screws
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
Printablestheidd
Cone 740 mm tall
Cone 740 mm tall https://youtu.be/pY1Pup1hL1w Category: 3D Printing
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
Printablesfsprint
Volvo 740/940 Swaybar endlink bushing
TPU, 100% infill Needs 2 per side
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
Printablesfsprint
Volvo 740/940 Panhard Bar bushings
Untested! You need to reuse the metal sleeves from the original bushings. 100% Infill TPU Need to print one of each
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEvgen_001
Volvo 740 rear seat lock rubber
Printed from TPU filament
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
Printablespaaahaaat
Wandhalterung für Omada by tp-link ER7406
Zweiteilige Wandhalterung für Omada by tp-link ER7406, welche insgesamt mit fünf Schrauben der Größe M4 an der Wand befestigt werden kann. Die mittlere Schraube am Steg verbindet beide Elemente miteinander. Darüber hinaus befinden sich an…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printables3DMonkeyNL
Netum C740 / C750 / C990 stand
Created this barcode scanner holder for the C750 but also works for the C740 / C990. Prints without support on the side.
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesnioko
Wall mount 2-1 Tablet Dell 7400
This is my take to put a Dell 7400 2-1 Laptop onto my Toolwall. It can be easily removed (altough I will not remove it, as it has a broken battery + keyboard anyway). In the picture, you see two “left” brackets, because I ran out of black…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMagneto
Case for bitholding screwdriver 813 Wera 05051274001 and 50mm bits
It holds the handle and bits securely while still easy to remove bits. A compact solution that allows the shape and size of the bit to be marked on the housing.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTecciztecatl
Arched laptop stand (Dell 7400)
This is a laptop stand so that it stands vertically on your desk giving you more space. Here are three versions for different laptop thicknesses 23, 24 and 37 mm.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJohn Lewis
Funnel for BEKO Cafe Esperto CEG7404C Coffee machine
The BEKO Cafe Esperto CEG7404C bean-to-cup coffee machine accepts ground coffee (decaf etc.) though a bypass hole on the top. This hole is a bit small, and I found myself making a mess. So I designed this funnel with replaced the OEM…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesdweberss
Philips Norelco MG3740 (Multigroom Series 3000) Charger Holder for EU/BR Plugs
Printed in PETG with standard supports.
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMolten Owl
Replacement of FAAC 740/741 Emergency Manual Release/Element polimerowy awaryjnego wysprzęglania bramy.
Tested it works with the Sliding gate opener(przesuwny napęd bramy). Printed in SUNLU PETG with 0.15mm layer high.
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEriknl
Covers for Jula Anslut 027400 Streetlight
Covers for Jula Anslut 027400 Streetlight. I made these to not shed too much light through my neighbor's window. Recommend printing in filament that has a matte color/surface. Maybe even use fuzzy skin. This will help avoid reflection of…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEvgen_001
Volvo 740/940 mandrel for rolling locks
This mandrel is convenient for repairing the lock cylinder. The result is perfect, without visible damage. Print from hard plastic
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmarler
Gateway 7405GX Laptop Drive Sled for CF Adapter
I wanted to breathe some life into an old Gateway 7405GX laptop but didn't want to use an old PATA hard drive as they are hard to find an unreliable. I found a Compact Flash to PATA / IDE adapter in my box of old parts and after testing…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDbrownlee
Apple II+ Power light lens for Datanetics 2nd version keyboard MM5740 Assy 01-0425
Printed face down. No supports needed.
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesZhaka
Tool Box Latches King Tony 87404
🛠 Replacement latch for King Tony toolbox (model 87404). Modeled from the ground up to replace fragile standard latches that break easily. It is highly recommended to print this part in a strong filament (PETG, ABS, or ASA) with at least…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDaedric Banana
PocketBook740/PocketBook InkPad 3 case
Assembly requires 9 M2 screws and nuts, as well as 3 M1.4 screws and their corresponding nuts. I printed it lying down, without supports. I’m new to models as complex as this one (at least in my view); if anyone prints it and something…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printablesmotionmind
Dell r740 Heavy Stand / Feet for Side Floor Placement
I didn't really have a good spot for my new (to me) Dell r740 and decided I'd rather just have it sitting at a 90 degree angle to save space. The feet line up to pins for rail attachment points on the server so they can't slip out from…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArrested_In_Shanghai
HP T740 Bezel/Blende
HP T740 Bezel/Blende. This was made completely by AI (Anthropic's Claude). I have no idea of the quality of the model and the scad file. Please be aware of that. Printing though worked fine for me.
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0